Introduction of advanced

multi-CD player operation

1
1Functiondisplay
Shows the function status.
Important
You can use the following functions only when
the remote control is set to DEQmode.
%Pressotodisplaythefunction
names.
Press orepeatedly to switch between the
following functions:
Repeat(repeat play)Disc title listRandom
(random play)Scan(scan play)ITSPlay
(ITS play)Pause(pause)Comp(compres-
sion and DBE)
#To return to the playback display, press BAND.
Note
If you do not operate the function within about 30
seconds, the display is automatically returned to
the playback display.

Repeating play

There are three repeat play ranges for the
multi-CD player: MCD (multi-CD player re-
peat), TRK(one-track repeat) and DISC(disc
repeat).
1 PressotoselectRepeat.
Press ountil Repeatappears in the display.
2 Pressmorntoselecttherepeat
range.
Press mor nuntil the desired repeat
range appears in the display.
!MCDRepeat all discs in the multi-CD
player
!TRKRepeat just the current track
!DISCRepeat the current disc
Notes
!If you select other discs during repeat play,
the repeat play range changes to MCD.
!If you perform track search or fast forward/re-
verse during TRK, the repeat play range
changes to DISC.

Playing tracks in a random

order

Random play lets you play back tracks in a
random order within the repeat range, MCD
and DISC.
1 Selecttherepeatrange.
Refer to Repeating play on this page.
2 PressotoselectRandom.
Press ountil Randomappears in the dis-
play.
3 Pressrtoturnrandomplayon.
Random:ONappears in the display. Tracks
will play in a random order within the pre-
viously selected MCDor DISCranges.
4 Pressqtoturnrandomplayoff.
Random:OFFappears in the display. Tracks
will continue to play in order.
Multi-CD Player
En 15
English
Section
06