Pioneer AXM-P7650 Introduction of DSP adjustments

Introduction of DSP

adjustments

Important

!You can use the following functions only when

the remote control is set to DEQmode.

!Following functions are effective only when

you connected a Pioneer multi-channel pro-

cessor (DEQ-P7650) to this unit.

By carrying out the following settings/adjust-

ments in the order shown, you can create a fi-

nely-tuned sound field effortlessly.

1Setting the speaker setting

2Using the position selector

3Auto TA and EQ (auto-time alignment and auto-

equalizing)

4Adjusting the time alignment

5Adjusting the speaker output levels using a

test tone

6Selecting a cross-over frequency

7Adjusting the speaker output levels

8Adjusting 3-band parametric equalizer

Operating the DSP menu

1

1DSPdisplay

Shows the DSP status.

%PressptodisplaytheDSPfunction

names.

Press prepeatedly to switch between the

following DSP functions:

Posi(position selector)Fad(balance adjust-

ment)SLA(source level adjustment)DRC

(dynamic range control)DIRECT(direct)

DolbyPLB(Dolby Pro Logic B)Downmix

(down mix)

#To return to the display of each source, press

BAND.

Notes

!If you do not operate the DSP function within

about 30 seconds, the display is automatically

returned to the source display.

!If both the center and the rear speakers are

set to OFFin the DSP details menu (refer to

Setting the speaker setting on page 24), you

cannot use DolbyPLB.

Digital Signal Processor

En

20

Section

07

Contents

Main Thank you for buying this Pioneer product. Contents About this manual 01 About this unit About digital and analog source Before You Start Precautions Use and care of the remote control Installing the battery Using the remote control operation mode switch 01 Reverse mode Dolby Digital/DTS compatibility Before You Start Page Whats What 02 Whats What 02 Turning the unit on 03 Selecting a source Adjusting the volume Turning the unit off Function menu switching 04 Repeating play Playing tracks in a random order Scanning tracks of a CD DVD Player 04 Using the TV tuner 05 Storing and recalling broadcast stations Storing the strongest broadcast stations sequentially TV tuner Playing a CD Introduction of advanced multi-CD player operation Repeating play Playing tracks in a random order Scanning CDs and tracks Pausing CD playback Using ITS playlists Creating a playlist with ITS programming Playback from your ITS playlist Erasing a track from your ITS playlist Erasing a CD from your ITS playlist Using disc title functions Entering disc titles Displaying disc titles Selecting discs from the disc title list Using CD TEXT functions Using compression and bass emphasis Introduction of DSP adjustments Operating the DSP menu Operating the DSP details menu Using the sound field control Page Using the dynamic range control Using the direct control Using the Dolby Pro Logic B Adjusting the Music mode Using the down-mix function Setting the speaker setting Correcting the subwoofers phase Selecting a cross-over frequency Adjusting the speaker output levels Adjusting the speaker output levels using a test tone Using the time alignment Adjusting the time alignment Using the auto-equalizer Auto TA and EQ (auto-time alignment and auto- equalizing) WARNING CAUTION Before operating the auto TA and EQ function Carrying out auto TA and EQ Using the equalizer Recalling equalizer curves Adjusting 3-band parametric equalizer Page Adjusting initial settings Setting the clock Adjusting the brightness 08 Correcting distorted sound Switching the telephone muting/attenuation Switching the auxiliary setting Switching the digital source setting 08 Switching the analog input setting Resetting the audio functions Initial Settings Turning the clock display on or off Using different entertainment displays Setting the digital source title Setting the analog source title Using the AUX source Setting remote control code type Title input Using the PGM button Troubleshooting Common Error messages Error messages Understanding auto TA and EQ error messages Specifications General Infraredremotecontrol PIONEER CORPORATION 4-1, MEGURO 1-CHOME, MEGURO-KU, TOKYO 153-8654, JAPAN <CRD3883-A> ES <KSNZF> <04C00000>