1 Presspandholduntil SPSetappears
inthedisplay.
2 Pressmorntoselectthe speaker
tobeadjusted.
Each press of mor nselects the speaker
in the following order:
Front speakersCenter speakerRear speak-
ersSubwooferS.W(subwoofer setting)
#You can switch to S.Wonly when the subwoo-
fer has been set to ON.
3 Pressqorrtoselectthecorrectsize
fortheselectedspeaker.
Each press of qor rselects the size in the
following order:
LARGE(large)SMALL(small)OFF (off)
#You cannot select OFF, when the front speak-
ers have been selected.
#You can turn ONor OFF, when the subwoofer
has been selected.
#You can switch Rev.(reverse phase) or
Normal(normal phase), when S.W(subwoofer
setting) has been selected.
4 PressBANDtoreturntotheplayback
display.
Correcting the subwoofers phase
If trying to boost the bass output of the sub-
woofer doesnt do much or rather makes you
feel that the bass gets more murky, this may
indicate that the subwoofers output and bass
content you hear over other speakers cancel
each other out. To remove this problem, try
changing the phase setting for the subwoofer.
1 Presspandholduntil SPSetappears
inthedisplay.
2 Pressmorntoselectthe subwoo-
fer.
Each press of mor nselects the speaker
in the following order:
Front speakersCenter speakerRear speak-
ersSubwooferS.W(subwoofer setting)
3 Pressrtoturnthesubwooferoutput
on.
4 PressntoselectS.W(subwooferset-
ting).
5 Pressqorrtoselectthesubwoofer
outputphase.
Press rto select Normal(normal phase).
Press qto select Rev.(reverse phase).
6 PressBANDtoreturntotheplayback
display.
Note
When playing a 2-channel mono source with Pro
Logic Bturned on, there may be occasions when
the following will occur:
!No audio is outputted if the center speaker
setting is SMALLor LARGEand no center
speaker is installed.
!Audio is heard only over the center speaker if
installed and the center speaker setting is
SMALLor LARGE.
Selecting a cross-over
frequency
You can select a frequency, under which
sounds are reproduced through the subwoo-
fer. If the installed speakers include one whose
size has been set to SMALL, you can select a
frequency, under which sounds are repro-
duced through a LARGEspeaker or subwoo-
fer.
Digital Signal Processor
En 25
English
Section
07