3 TurntheignitionswitchtoONorACC.
If the cars air conditioner or heater is turned
on, turn it off. Noise from the fan in the air
conditioner or heater may prevent correct auto
TA and EQ.
#Press SOURCEto turn the source on if this
unit is turned off.
4 Selectthe positionfortheseaton
whichthe microphoneisplaced.
Refer to Using the position selector on page
22.
#If no position is selected before you start auto
TA and EQ, FLis selected automatically.
5 PressSOURCEandholduntil theunit
turnsoff.
6 PressandholdptoentertheautoTA
andEQmeasurementmode.
7 Plugthemicrophoneintothemicro-
phoneinput jackonthisunit.
8 Pressrtostartthe autoTAandEQ.
9 Getoutofthecar andclosethedoor
within10 secondswhenthe10-second
count-downstarts.
The measurement tone (noise) is outputted
from the speakers, and auto TA and EQ be-
gins.
#When all speakers are connected, auto TA
and EQ is completed in about six minutes.
#To stop auto TA and EQ, press any keys.
#To cancel auto TA and EQ part way through,
press BAND.
10 Whenauto TAandEQis completed,
COMPLETEis displayed.
When correct measurement of car interior
acoustic characteristics is not possible, an
error message is displayed. (Refer to Under-
standing auto TA and EQ error messages on
page 40.)
11 PressBANDtocanceltheautoTAand
EQmode.
12 Storethemicrophonecarefullyinthe
glovecompartment.
Store the microphone carefully in the glove
compartment or any other safe place. If the
microphone is subjected to direct sunlight for
an extended period, high temperatures may
cause distortion, color change or mal-
function.
Using the equalizer
The equalizer lets you adjust the equalization
to match car interior acoustic characteristics
as desired.
Recalling equalizer curves
There are seven stored equalizer curves which
you can easily recall at any time. Here is a list
of the equalizer curves:
Display Equalizer curve
SUPERBASS Super bass
POWERFUL Powerful
NATURAL Natural
Digital Signal Processor
En
30
Section
07