Note
If you turn random play on during DISCand then
return to the playback display, D.RANDOMap-
pears in the display.
Scanning CDs and tracks
While you are using DISC, the beginning of
each track on the selected disc plays for about
10 seconds. When you are using MCD, the be-
ginning of the first track of each disc is played
for about 10 seconds.
1 Selectthe repeatrange.
Refer to Repeating play on the previous page.
2 PressotoselectScan.
Press ountil Scanappears in the display.
3 Pressrtoturnscanplayon.
Scan:ONappears in the display. The first 10
seconds of each track of the current disc (or
the first track of each disc) is played.
4 Whenyou findthedesiredtrack(or
disc)pressqtoturnscanplayoff.
Scan:OFFappears in the display. The track (or
disc) will continue to play.
#If the display has automatically returned to
the playback display, select Scanagain by press-
ing o.
Notes
!After track or disc scanning is finished, nor-
mal playback of the tracks will begin again.
!If you turn scan play on during DISCand then
return to the playback display, T.SCANap-
pears in the display.
Pausing CD playback
Pause lets you temporarily stop disc playback.
1 PressotoselectPause.
Press ountil Pauseappears in the display.
2 Pressrtoturnpauseon.
Pause:ONappears in the display. Play of the
current track pauses.
3 Pressqtoturnpauseoff.
Pause:OFFappears in the display. Play will re-
sume at the same point that you turned pause
on.
Using ITS playlists
ITS (instant track selection) lets you make a
playlist of favorite tracks from those in the
multi-CD player magazine. After you have
added your favorite tracks to the playlist you
can turn on ITS play and play just those selec-
tions.
Creating a playlist with ITS
programming
You can use ITS to enter and play back up to
99 tracks per disc, up to 100 discs (with the
disc titles). (With multi-CD players sold before
the CDX-P1250 and CDX-P650, up to 24 tracks
can be stored in the playlist.)
1 Playa CDthatyouwant toprogram.
Press qor rto select a CD.
2 PressoandholduntilTITLEappears
inthe display,thenpressoto selectITS.
After TITLEis displayed, press orepeatedly,
the following functions appear in the display:
TITLE(disc title input)ITS(ITS program-
ming)
Multi-CD Player
En
16
Section
06