Pioneer CD-BTB100 Using a cellular phone to initiate a connection, Tailed instructions

Section

05Operating with different head units

!A phone may be connected via Bluetooth wireless technology but not yet registered with this unit. In this case it is said to be temporarily connected, and the available features are limited. To take full advantage of all the features available, we recommend you register your phone with this unit. Refer to Registering connected cellular phone on this page for more on this.

Using a cellular phone to initiate a connection

Putting the unit in C.OPEN mode allows you to establish a Bluetooth wireless connection from your phone. You may need to refer to the operation manual that came with your phone if you are unsure how to initiate a connection from your phone.

1 Put the unit in C.OPEN mode

Refer to Function compatibility charts on page 26.

#Before you put the unit in C.OPEN mode NO TEL is displayed.

2Use cellular phone to connect to this unit.

When the connection is established, TEL is

displayed.

# Operation varies depending on the type of your cellular phone. Refer to the instruction man- ual that came with your cellular phone for de-

tailed instructions.

# You may need to enter the link code on your cellular phone to complete the connection.

vantage of the features available with Blue- tooth wireless technology. Only one cellular phone can be registered.

1 Put the unit in REGIST mode

Refer to Function compatibility charts on page 26.

Before you put the unit in REGIST mode TEL is displayed.

2Use cellular phone to register to this unit.

When the registration is completed, TEL REG.

is displayed.

# Operation varies depending on the type of your cellular phone. Refer to the instruction man- ual that came with your cellular phone for de-

tailed instructions.

# You may need to enter the link code on your cellular phone to complete the connection.

Disconnecting a cellular phone

When you are done using your phone with this unit, you can close the Bluetooth wireless con- nection.

%Put the unit in DISCONN. mode

Refer to Function compatibility charts on page 26.

After the disconnection is completed, NO TEL is displayed.

Registering connected cellular phone

You can register a phone that is temporarily connected to this unit in order to take full ad-

32 En