Installation
Important
!Before making a final installation of the unit, temporarily connect the wiring to confirm that the connections are correct and the system work properly.
!Use only the parts included with the unit to ensure proper installation. The use of un- authorized parts can cause malfunctions.
!Consult with your nearest dealer if installation requires the drilling of holes or other modifica- tions of the vehicle.
!Install the unit where it does not get in the dri- ver’s way and cannot injure the passenger if there is a sudden stop, like an emergency stop.
!When installing this unit, be sure to make suf- ficient space on its top surface. There is an an- tenna under the top surface and covering it may cause trouble to the radio transmission and reception.
!Depending on the location of this unit, some noise could be heard during playback of the songs on Bluetooth audio player. In this situa- tion, move this unit so as to reduce noise.
!When mounting this unit, make sure none of the leads are trapped between this unit and the surrounding metalwork or fittings.
!Do not mount this unit near the heater outlet, where it would be affected by heat, or near the doors, where rainwater might splash onto it.
!Before drilling any mounting holes always check behind where you want to drill the holes. Do not drill into the gas line, brake line, electrical wiring or other important parts.
!If this unit installed in the passenger compart- ment, anchor it securely so it does not break free while the vehicle is moving, and cause in- jury or an accident.
!If this unit is installed under a front seat, make sure it does not obstruct seat move- ment. Route all leads and cords carefully around the sliding mechanism so they do not caught or pinched in the mechanism and cause a
|
| Section |
|
| 07 |
|
| English |
Installing this unit | ||
Mounting with Velcro fasteners
Thoroughly wipe off the surface before affixing the Velcro fasteners.
!If the Velcro fasteners (hard) adhere to the car mat directly, you may install this unit without using the Velcro fasteners (soft).
%Mount this unit using the Velcro fasten-
ers.
This unit
Velcro fastener (hard)
Velcro fastener (soft)
Car mat or chassis
Installing the microphone
CAUTION
It is extremely dangerous to allow the micro- phone lead to become wound around the steer- ing column or gearstick. Be sure to install the unit in such a way that it will not obstruct driving.
Note
Install the microphone in a position and orienta- tion that will enable it to pick up the voice of the person operating the system.
En 
37
