Pioneer DEH-11E owner manual Operating this unit, Built-in Player

	Section
Operating this unit	02

The LOCAL 4 setting allows reception of only the strongest stations, while lower settings let you receive progressively weaker stations.

Storing the strongest broadcast frequencies

BSM (best stations memory) lets you automa- tically store the six strongest broadcast fre- quencies under preset tuning buttons 1 to 6. Once stored you can tune in to those frequen- cies with the touch of button.

!Storing broadcast frequencies with BSM may replace broadcast frequencies you have saved using buttons 1 to 6.

1Press FUNCTION to select BSM.

2Press a to turn BSM on.

The six strongest broadcast frequencies are stored in the order of their signal strength.

#To cancel the storage process, press b.

Built-in Player

Playing a disc

1Insert a CD into the CD loading slot.

Playback will automatically start.

# Be sure to turn up the label side of a disc.

# After a CD has been inserted, press SOURCE

to select the built-in CD player.

# You can eject a CD by pressing EJECT.

2To perform fast forward or reverse, press and hold c or d.

3To skip back or forward to another track, press c or d.

Notes

!Read the precautions for discs and player on page 14.

!If an error message such as ERROR-11 is dis- played, refer to Error messages on page 14.

Repeating play

Repeat play lets you hear the same track over again.

1Press FUNCTION to select RPT.

2Press c or d to select the repeat range. DSC – Repeat all tracks

TRK – Repeat the current track

# If you perform track search or fast forward/re-

verse, repeat play is automatically cancelled.

# To return to the normal display, press BAND.

Playing tracks in random order

Random play lets you play back tracks on the CD in a random order.

1Press FUNCTION to select RDM.

2Press a or b to turn random play on or

off.

When random play is on, RDM appears in the

display.

# To return to the normal display, press BAND.

Scanning tracks of a CD

Scan play lets you hear the first 10 seconds of each track on the CD.

1Press FUNCTION to select SCAN.

2Press a to turn scan play on.

SCAN appears in the display. The first 10 sec- onds of each track is played.

3When you find the desired track press

b to turn scan play off.

# If the display has automatically returned to the playback display, select SCAN again by press-

ing FUNCTION.

# After scanning of a CD is finished, normal playback of the tracks will begin again.

Pausing disc playback

Pause lets you temporarily stop playback of the disc.

English

En 7