Removingthe unit

1 Extendtop and bottom of the trim ring
outwardsto remove the trim ring. (When
reattachingthe trim ring, point the side
witha groove downwards and attach it.)
Trimring
!Itbecomes easy to remove the trim ring if
thefront panel is released.
2 Insertthe supplied extraction keys into
bothsides of the unit until they click into
place.
3 Pullthe unit out of the dashboard.

DIN Rear-mount

1 Extendtop and bottom of the trim ring
outwardsto remove the trim ring. (When
reattachingthe trim ring, point the side
witha groove downwards and attach it.)
Trimring
!Itbecomes easy to remove the trim ring if
thefront panel is released.
2 Determinethe appropriate position
wherethe holes on the bracket and the
sideof the unit match.
3 Tightentwo screws on each side.
Screw
Mountingbracket Dashboardor console
!Useeither truss screws (5 mm × 8 mm) or
flushsurface screws (5 mm × 9mm), de-
pendingon the shape of screw holes in the
bracket.
Fastening the front panel
Ifyou do not plan to detach thefront panel,
thefront panel can be fastened with supplied
screw.
Screw
Installation
En 13
English
Section
04