Pioneer DEH-11E DIN front/rear mount

Important

!Checkall connections and systems before

finalinstallation.

!Donot use unauthorized parts. Use of un-

authorizedparts may cause malfunctions.

!Consultyour dealer if installation requires dril-

lingof holes or other modifications to the vehi-

cle.

!Donot installthis unitwhere :

—itmay interfere with operation of the vehi-

cle.

—itmay cause injury to a passenger as a re-

sultof a sudden stop.

!Thesemiconductor laser will be damaged if it

overheats.Install this unit away from hot

placessuch as near the heater outlet.

!Optimumperformance is obtained when the

unitis installed at an angle of less than 60°.

60°

DIN front/rear mount

Thisunit can be properly installed either from

“Front”(conventionalDIN front-mount) or

“Rear”(DIN rear-mount installation, utilizing

threadedscrew holes at the sides of unit chas-

sis).For details, refer to the following installa-

tionmethods.

DIN Front-mount

Installationwith metal strap and screws

1 Insertthe mounting sleeve into the

dashboard.

Wheninstalling in a shallow space, use a sup-

pliedmounting sleeve. If there is enough

spacebehind the unit, use factor y supplied

mountingsleeve.

2 Securethe mounting sleeve by using a

screwdriverto bend the metal tabs (90°)

intoplace.

Dashboard

Mountingsleeve

3 Installthe unit.

Usecommercially available parts when instal-

ling.

Screw (M48)

Screw Metal strap

Nut

Filrewall or

metal support

#Makesure that the unit is installed securely in

place.Unstable installation may cause this unit

tomalfunction, such as sound skip.

Installation

Section