Pioneer DEH-P3950MP Tuner Listening to the radio, Introduction of advanced tuner operation, Band

Black plate (8,1)

Section

03 Tuner

Listening to the radio			4 To perform seek tuning, press and hold
			c or d for about one second and release.
1	2	3	The tuner will scan the frequencies until a
			broadcast strong enough for good reception is
			found.

5 4

Important

#You can cancel seek tuning by briefly pressing c or d.

#If you press and hold c or d you can skip sta-

tions. Seek tuning starts as soon as you release the button.

If you are using this unit in North, Central or South America, reset the AM tuning step (see Setting the AM tuning step on page 21).

1Band indicator

Shows which band the radio is tuned to, AM or FM.

2Frequency indicator

Shows the frequency to which the tuner is tuned.

3Preset number indicator

Shows which preset has been selected.

4LOC indicator

Shows when local seek tuning is on.

Introduction of advanced tuner operation

%Press FUNCTION to display the function names.

Press FUNCTION repeatedly to switch be- tween the following functions:

BSM (best stations memory)—LOCAL (local

seek tuning)

# To return to the frequency display, press

BAND.

# If you do not operate the function within about

30 seconds, the display is automatically returned to the frequency display.

5Stereo (5) indicator

Shows when the selected frequency is being broadcast in stereo.

1Press SOURCE to select the tuner. Press SOURCE until you see TUNER dis- played.

2Press BAND to select a band.

Press BAND until the desired band (F1, F2, F3 for FM or AM) is displayed.

3To perform manual tuning, briefly press c or d.

8 En

Storing and recalling broadcast frequencies

If you press any of the preset tuning buttons 1 to 6 you can easily store up to six broadcast frequencies for later recall with the touch of a button.

!Up to 18 FM stations, six for each of the three FM bands, and six AM stations can be stored in memory.

%When you find a frequency that you want to store in memory, press one of pre- set tuning buttons 1 to 6 and hold until the preset number stops flashing.

The number you have pressed will flash in the preset number indicator and then remain lit. The selected radio station frequency has been stored in memory.

<YRD5079-A/U>8