Pioneer DEH-P3950MP Before You Start About this unit, About MP3, Visit our website, About WMA

Black plate (4,1)

Section

01 Before You Start

About this unit	Windows Media and the Windows logo are tra-
	demarks or registered trademarks of Microsoft
CAUTION	Corporation in the United States and/or other
! Do not allow this unit to come into contact	countries.
with liquids. Electrical shock could result.
Also, this unit damage, smoke, and overheat	Note
could result from contact with liquids.	This unit may not operate correctly depending on
! Keep this manual handy as a reference for op-
	the application used to encode WMA files.
erating procedures and precautions.

!Always keep the volume low enough so that

you can hear sounds from outside the vehicle.	About MP3
! Protect this unit from moisture.
! If the battery is disconnected or discharged,	Supply of this product only conveys a license
the preset memory will be erased and must be	for private, non-commercial use and does not
reprogrammed.	convey a license nor imply any right to use
! If this unit does not operate properly, contact	this product in any commercial (i.e. revenue-
your dealer or nearest authorized Pioneer Ser-	generating) real time broadcasting (terrestrial,
vice Station.	satellite, cable and/or any other media), broad-
	casting/streaming via internet, intranets and/
Visit our website	or other networks or in other electronic con-
	tent distribution systems, such as pay-audio or
Visit us at the following site:	audio-on-demand applications. An indepen-
	dent license for such use is required. For de-
	tails, please visit
	http://www.mp3licensing.com.

!We offer the latest information about Pio- neer Corporation on our website.

About WMA

The Windows Media™ logo printed on the box indicates that this unit can play back WMA data.

WMA is short for Windows Media™ Audio and refers to an audio compression technol- ogy that is developed by Microsoft Corpora- tion. WMA data can be encoded by using Windows Media Player version 7 or later.

4 En

Use and care of the remote control

Installing the battery

Slide the tray out on the back of the remote control and insert the battery with the plus (+) and minus (–) poles pointing in the proper di- rection.

<YRD5079-A/U>4