Pioneer DEH-P3950MP Other Functions Switching the auxiliary setting, Setting the rear output

	Section				Black plate (22,1)
07
			Other Functions
		Switching the auxiliary setting		3 Press c or d to switch the subwoofer
		Auxiliary equipments connected to this unit		output or rear output.
				Pressing c or d will switch between P/O :S/W
		can be activated individually. Set each AUX
				and P/O :FUL and that status will be displayed.
		source to ON when using. About connecting
		or using auxiliary equipments, refer to Using			Notes
		the AUX source on this page.
				! Even if you change this setting, there is no
		1 Press FUNCTION to select AUX1/AUX2.
					output unless you turn the subwoofer output
		2 Press a or b to turn AUX1/AUX2 on or			on (refer to Using subwoofer output on page
				19).
		off.
				! If you change this setting, subwoofer output
					in the audio menu return to the factory
		Setting the rear output and			settings.
		subwoofer controller		Turning the clock display
		This unit’s rear output (rear speaker leads out-
		put and RCA rear output) can be used for full-		on or off
		range speaker (R-SP :FUL) or subwoofer		You can turn the clock display on or off.
		(R-SP :S/W) connection. If you switch the rear
		output setting to R-SP :S/W, you can connect		% Press CLOCK to turn the clock display
		a rear speaker lead directly to a subwoofer		on or off.
		without using an auxiliary amp.		Each press of CLOCK turns the clock display
		Initially, the unit is set for rear full-range speak-		on or off.
		er connection (R-SP :FUL). When rear output is		# The clock display disappears temporarily
		connected to full range speakers (when		when you perform other operations, but the clock
		R-SP :FUL is selected), you can connect other		display appears again after 25 seconds.
		full range speakers (P/O :FUL) or a subwoofer
		(P/O :S/W) to the RCA rear output.			Note

1Press FUNCTION to select R-SP.

2Press a or b to switch the rear output setting.

Pressing a or b will switch between

R-SP :FUL (full-range speaker) and R-SP :S/W

(subwoofer) and that status will be displayed.

# When no subwoofer is connected to the rear

output, select R-SP :FUL.

# When a subwoofer is connected to the rear

output, set for subwoofer R-SP :S/W.

# When the rear output setting is R-SP :S/W, you cannot operate the following procedure.

Even when the sources are off, the clock display appears on the display. Pressing CLOCK turns the clock display on or off.

Using the AUX source

This unit can control up to two auxiliary equip- ments such as VCR or portable devices (sold separately). When connected, auxiliary equip- ments are automatically read in as AUX sources and assigned to AUX1 or AUX2. The relationship between AUX1 and AUX2 sources is explained below.

22 En

<YRD5079-A/U>22