Initial Settings
Notes
•Even if you change this setting, there is no output unless you switch the non fading out- put (refer to page 35) or subwoofer output (refer to page 34) in the audio menu on.
•If you change the subwoofer controller, sub- woofer output and non fading output in the audio menu return to the factory settings.
1 Press FUNCTION to select SW.
Press FUNCTION repeatedly until Rear SP appears in the display.
2Change the rear output setting with 5/∞. Pressing 5/∞ will switch between Rear SP :FULL
Notes
•When no subwoofer is connected to the rear output, select Rear SP:FULL.
•When a subwoofer is connected to the rear output, set for subwoofer Rear SP:S.W.
•When the rear output setting is Rear SP:S.W, you cannot change the subwoofer controller.
3Change the subwoofer controller with
2/3.
Pressing 2/3 will switch between S.W Control :INT and S.W Control :EXT and that status will be displayed. 
Section
08
Switching the Telephone |
| |
Muting/Attenuation | English | |
Sound from this system is muted or attenuated | ||
| ||
automatically when a call is made or received |
| |
using a cellular telephone connected to this |
| |
product. |
| |
1 Press FUNCTION to select TEL. | Español | |
Press FUNCTION repeatedly until Telephone | ||
| ||
appears in the display. |
| |
2 Switch the telephone muting/attenuation |
| |
with 2/3. |
| |
Pressing 2/3 will switch between Telephone |
| |
:ATT (attenuation) and Telephone :MUTE (mut- | Deutsch | |
ing) and that status will be displayed. | ||
| ||
| Français | |
| Italiano | |
| Nederlands |
En 39
