5. Press the MAIL SLOT OPEN/CLOSE button.

÷The MAIL SLOT closes.

÷The indicator which indicates the presence of a disc in the mail slot lights up, and the disc is transported to the disc address specified above.

÷When the disc is inserted in the disc address, it is stored in memory. Now the installation of that disc is complete.

)

T T

T T T

7

8

9

 

4

5

6

OPEN/CLOSE )

1

2

3

0

ESC

ENT

 

6. Install 100 discs by repeating the above steps.Method of inserting discs by taking out the 50-disc magazines

With this method, the magazines are designed so that they cannot be taken out without using the key in order to protect discs from theft.

1. Insert the key into the Key switch and turn it to the UNLOCK position.÷The DOOR OPEN button lights up.

)

T T

T T T

7 8 9

4 5 6

1 2 3

0 ESC ENT

LOCK

UNLOCK

2. Press and hold the DOOR OPEN button for more than 4 sec.

÷The blinking “OP” appears on the mode indicator and the mechanism is initialized in this period.

÷After initialization, the front door opens.

÷“OPU-L”is displayed. “U” indicates the upper magazine and “L” indicates the lower magazine.

)

T T

T T T

7

8

9

DOOR OPEN

4

5

6

\

1

2

3

0

 

 

 

HOW TO INSTALL OR EXCHANGING DISCS

3.Stand the magazine handle toward the front and, while pushing the eject button, pull out the maga-

zine toward the front.

÷The indicator which indicates that a magazine is pulled out blinks. Both of the two magazines can be taken out.

Eject button

\

NOTE:

÷ While discs are loaded in the magazine, do not turn it upside down. Otherwise the discs will drop.

4. Insert discs in the magazines.

÷Set discs with the label sides facing up taking care so that no disc is inserted obliquely.

÷Each magazine accommodates a total of 50 discs.÷Never insert a disc obliquely, otherwise it will be damaged.Label surface

When loading the magazine with discs directly by hand, take care of the following points.

÷Insert each disc with the label side up.

÷Insert each disc horizontally by aligning it with the shelves on the left and right. Do not insert obliquely to prevent damaging the disc.

÷Do not leave fingerprints on the recording surface of disc.

To insert discs securely into the magazine, it is recommended to load discs using the mail slots whenever possible.

5. Load the magazines back in the Changer.÷Fold the handle toward the left as you push the silver plate.

11

<DRC1129> En