HOW TO INSTALL OR EXCHANGING DISCSMethod of inserting discs one by one issuing commands from the host computer

The disc installation, removal and exchanging methods are basically identical. To simply install a disc, place a disc on the tray. To simply remove a disc, remove the disc from the tray. To exchange a disc, remove the disc on the tray and place another disc on it.

Method of inserting discs one by one by operating the Changer control panel

The disc installation, removal and exchanging methods are basically identical. To simply install a disc, place a disc on the tray. To simply remove a disc, remove the disc from the tray. To exchange a disc, remove the disc on the tray and place another disc on it.

1. Issue the POSITION TO ELEMENT command from the host computer.÷The mail slot opens.2. Place a disc on the disc tray, with the label side facing up.

Only one disc can be loaded in the tray of the mail slot. Do not load more than one disc to prevent malfunction.

When placing a disc on the mail slot tray, place the disc with the label side up so that it comes below the black parts on the left and right of the deep of the tray.

÷To exchange discsRemove the disc on the tray and place the replacement disc on the tray.÷To install a discPlace the disc on the tray.÷To remove a discTake out the disc on the tray.3. Press the MAIL SLOT OPEN/CLOSE button.÷The MAIL SLOT closes.

)

T T

T T T

7

8

9

 

4

5

6

OPEN/CLOSE )

1

2

3

0

ESC

ENT

 

4. Issue the MOVE MEDIUM command from the host computer.÷The disc in the MAIL SLOT is stroed in the magazine.

It is possible to install 100 discs by repeating the above steps, but this requires to operate both the host computer and Changer. Meanwhile, the following method allows to install discs by operating only the control panel of the Changer.

1. Insert the key into the Key switch and turn it clockwise to the UNLOCK position.

÷The switch is usually in the LOCK position while the key is not inserted.

)

T T

T T T

7 8 9

4 5 6

1 2 3

0 ESC ENT

LOCK

UNLOCK

2. Specify the address to insert the disc with the numeric buttons of the control panel.

÷The address is originally a hex code between 0001h and 0064h. However, in this case, specify it with a decimal number between 1 and 100.

÷For example, pressing key “1” means address #1 and CH 1 appears on the mode indicator..

)

 

T T

 

7

8

9

 

T T T

 

 

 

 

 

 

 

4

5

6

7

8

9

 

 

 

4

5

6

 

 

 

1

2

3

1

2

3

0

ESC ENT

 

 

 

0

ESC

ENT

100DISCS CD -- ROM AUTCHANGER

3.Press the ENT (ENTER) button of the control panel.

÷The mail slot opens.

4. Place a disc on the disc tray, with the label side facing up.

Only one disc can be loaded in the tray of the mail slot. Do not load more than one disc to prevent malfunction.

When placing a disc on the mail slot tray, place the disc with the label side up so that it comes below the black parts on the left and right of the deep of the tray.

÷To exchange discs

Remove the disc on the tray and place the replacement disc on the tray.

÷To install a disc

Place the disc on the tray.

÷To remove a disc

Take out the disc on the tray.

10

<DRC1129> En