Pioneer DVD-V5000 Video Adjust menu, Creating your own interlace output presets, DISPLAY, Standard, PROGRESSIVE, Recall Settings, •Standard – Normal, Settings” then press ENTER

Video Adjust menu 08

Chapter 8

Video Adjust menu

Video Adjust

•Default setting is Standard.

From the Video Adjust screen you can select the standard video presentation or define presets of your own.

1Press HOME MENU and select “Video Adjust” from the on-screen display.

Audio Settings	Video Adjust
Play Mode	Disc Navigator
Initial Settings

2Use the / buttons (cursor left/right) to select a preset.

Video Adjust

Standard

•Standard – Normal

•I. Memory1–2 / P. Memory1–2 – Use for making your own interlaced / progressive presets (see below)

3Press ENTER to make the setting and exit the Video Adjust screen.

Depending on the disc and the TV/monitor, you may not see the effect clearly.

Creating your own interlace output presets

These presets are available when the video output is set to interlace. (Use the front panel PROGRESSIVE button to switch between interlace and progressive video output. See also page 15)

1Select one of the Memory presets (see above).

2Press  (cursor down) to select “Detailed

Settings” then press ENTER.

Video Adjust

I.Memory1

Detailed Settings

3 Adjust the picture quality settings.

Interlace Memory 1 (I. Memory 1)

Recall Settings
		I.Memory1
Fine Focus			On
Contrast	min			max
Sharpness	soft			fine
Chroma Level	min			max
Hue	green			red

•Use the
/ buttons (cursor up/down) to select a setting.

•Use the / buttons (cursor left/right) to adjust the current setting.

•Press DISPLAY to switch between full and single view.

•You can change the preset number from the Recall Settings menu item.

You can adjust any or all of the following picture quality settings:

•Fine Focus – Switch On to reveal greater detail (high resolution) in the picture.

•Contrast – Adjusts the contrast between light and dark elements in the picture.

39