Barcode Stack / Command Stack

10

Merge Groups

1Use the / (cursor up/down) buttons to select the next available step.

The group divider is here.

Command Stack

 

 

 

Group(1-002)

Command(1-002)

 

 

Group001

001

02:000150-002050

 

Group002

002

06:22-23

* * *

 

 

003

 

 

 

 

004

 

 

 

 

005

 

 

 

 

006

 

 

 

 

007

 

 

 

 

008

 

 

 

Move

Select ENTER Delete

CLEAR Exit

HOME MENU

2Press ENTER.

3Use the / (cursor up/down) buttons to select “COMMAND” then press ENTER.

Command Stack

 

 

 

Group(1-002)

Command(1-002)

 

Group001

001

02:000150-002050

Group002

002

06:22-23

* * *

 

003

SEGMENT PLAY

 

 

004CHAPTER PLAY

005COMMAND

Move

Select ENTER Return RETURN Exit

HOME MENU

4Use the / (cursor up/down) buttons to select “MERGE GROUP.”

Command Stack

 

 

 

 

Group(1-002)

Command(1-002)

 

 

Group001

001

02:000150-002050

STOP

 

 

PLAY PAUSE

Group002

002

06:22-23

* * *

 

 

003

STEP REV

STEP FWD

 

WAIT

000 sec.

 

004

 

REPEAT GROUP

 

 

005

GO TO GROUP

000

006DIVIDE GROUP

007MERGE GROUP

Move

Select ENTER Return RETURN Exit

HOME MENU

5

Press ENTER.

 

 

 

Command Stack

 

 

 

Group(1-001)

Command(1-005)

 

 

Group001

001 02:000150-002050

 

 

002

06:22-23

* * *

 

 

003

PLAY

 

 

 

004

03:123000-129000

 

 

005

05:03-07

03 2 1

 

 

006

 

 

 

 

007

 

 

 

 

008

 

 

 

Move

Select ENTER Return

RETURN Exit HOME MENU

The group divider is erased and the previous group is merged with the following group.

The group number is adjusted for each subsequent group.

6Save the change.

Merges are only saved when “OK” is highlighted and ENTER is pressed.

If “CANCEL” is highlighted when the ENTER is pressed, all merges are reversed.

If the power is interrupted while saving a barcode stack/command stack during video playback and the disc is still spinning, the settings are not recorded.

When disconnecting the power cord, always turn off the main power switch first (the power indicator is not lit) or use the remote control to set the unit to Standby mode (the power indicator changes to orange).

61