09Advanced Setup Menu

Key Lock

The Key Lock sets whether remote control or front panel buttons are enabled or disabled.

1Press and hold HOME MENU for one second.

The screen displays the ADV. SETUP menu.

2Use the  (cursor down) button to select KEY LOCK.

2. IR (Enable/Disable)

With the IR Disable, the unit ignores commands sent from the remote control or through barcodes.

3. FRONT (Enable/Disable)

With the Front Disable, the unit ignores commands issued from the front panel.

5Press RETURN to cause the display to return from the KEY LOCK setting screen to the ADV. SETUP menu.

3Use the / (cursor left/right) buttons to toggle the setting ON then press ENTER. Select OFF to disable the Key Lock function.

4Use the / (cursor up/down) buttons to select an item, then the / (cursor left/right) buttons to set the item.

1. TRAY LOCK (Off/On)

With the Tray Lock ON, the disc tray cannot be opened by using the remote control’s OPEN/CLOSE ￿button, the front panel’s ￿button, or the RS-232C Tray Open command.

To Temporarily Suspend KEY LOCK

The Key Lock setting is preserved even when the player’s power is turned OFF. However, the Key Lock function can be temporarily suspended if necessary to change discs or modify other settings.

To temporarily suspend the Key Lock, hold down the RETURN, the  (cursor down), and the ￿￿buttons simultaneously for approximately 2 seconds.

This release operation can be performed during playback if necessary.

All KEY LOCK, TRAY LOCK functions are released and ordinary operations can be performed. This condition does not change any settings preserved in the player. If the power is turned off then back on, the unit reverts to the previous locked condition.

With the KEY LOCK function temporarily suspended, hold down the RETURN, the  (cursor down), and the ￿￿buttons simultaneously for approximately 2 seconds. The suspended condition ends and the unit returns to a locked status.

While the KEY LOCK function is temporarily suspended, even if the ADV. SETUP menu is opened and the KEY LOCK setting is changed, the temporarily suspended state continues when the ADV. SETUP menus is closed. The newly selected KEY LOCK setting only takes effect when the temporary suspension is ended.

44