Pioneer DVD-V5000 Advanced Functions, Barcode Stack/Command Stack Settings, Page, Page, Page,
Page,
Page,
Page,
Page, 5Execute, Pages 50 –,
Pages 50 –,
Pages 60 –

10Barcode Stack / Command Stack

Advanced Functions

The barcode stack/command stack functions can be memorized in separate groups so as not to affect previously input commands.

For example, recording the contents of multiple discs separately or allow multpile people to use a single player.

Record commands in a separate group from previously input contents

1 Create new group

Page 59

At the left side of the barcode stack/ command stack input screen is the current memory group number (ex. Group001). This group number is necessary for performing commands. The user should make note of these for later reference.

2Use a barcode reader to read barcodes and transmit to player

Page 51

The remote control unit can also be used to input the numbers.

Pages 50 – 56

3Repeat step 2 in the desired playback order

4After inputting the commands, retain the data in player memory

Page 57

5Execute

Page 62

Select the group number as noted in step 1.

Commands already recorded in the player’s memory can be reordered in one or more groups.

Pages 60 – 61

However, the order of commands cannot be changed.

Barcode Stack/Command Stack Settings

DVD barcode commands are recorded by the player. These commands can be called up to perform continuous or step-by-step playback.

The recorded data is retained even if the power is disconnected.

Access Barcode Stack / Command Stack Menu

1Press and hold HOME MENU for one second.

The screen displays the ADV. SETUP menu.

2Use the  (cursor down) button to select “COMMAND STACK.”

3 Press ENTER.

Command Stack

Group(1-001) Command(0-000)

Group001001 002 003 004 005 006 007 008

Move Select ENTER Exit HOME MENU

•Instructions for using this menu screen are available in the following sections.

•To set a barcode stack/command stack, use either a barcode reader (sold separately) or the remote control.

50