Rear Panel

1

2 3

4 5 6 7

8 9

0

-

CONTROL

IN

 

 

Y

 

 

 

COMPONENT

 

 

 

VIDEO OUT

 

VIDEO OUT S-VIDEO OUT

VIDEO

PB

 

TV SYSTEM

 

 

PAL

OUT

 

 

SELECT

 

 

NTSC AUTO

 

 

 

 

 

PR

 

 

 

AUDIO OUT (2CH)

 

 

1

2

DIGITAL OUT

 

 

 

OPT.

 

L

 

 

 

ATTENUATOR

 

 

 

OFF

 

 

 

ON

 

 

 

R

 

AUDIO OUT (5.1CH)

FRONT SURROUND

LCENTER

RSUB

WOOFER

AC IN

NAMES AND FUNCTIONS

1DIGITAL OUT jacks (coaxial, optical (OPT.)) Use to output the digital audio signal recorded on discs. You can output the digital signal via either coaxial or optical output jack to an AV amplifier or receiver (page 18).

6VIDEO OUT SELECT switch

Use to set which output is used to output the video signals. Select either video/S-video or component video signal output depending on the connections you make (page 20).

2CONTROL IN jack

Use to connect this player to another component bearing the Pioneer ë mark. This lets you control this unit as though it were a component in a system. Player operations are then performed by pointing the remote control at the component that the player is connected to (page 21).

3TV SYSTEM switch

Use to change the TV signal mode to either PAL or NTSC according to the type of TV and disc to be used. When the switch is in the AUTO position, the player outputs the format on the disc as is

(page 21). (The TV SYSTEM switch is not present on DVD-V630.)

4VIDEO OUT jack

Connect to the video input on a TV or monitor or AV amplifier or receiver with video input capability. When using this jack, be sure to set VIDEO OUT SELECT to the left position (page 20).

5S-VIDEO OUT jack

If your TV or monitor has an S-video input, clear picture reproduction is possible by connecting the player to your TV or monitor via the S-video jack. When using this jack, be sure to set VIDEO OUT SELECT to the left position (page 20).

7COMPONENT VIDEO OUT jacks

If your projection monitor, projector or similar component has component video inputs, you can produce a higher quality picture on your projection monitor or projector by connecting to the component video outputs on this unit. When using these jacks, be sure to set VIDEO OUT SELECT to the right position (page 20).

8ATTENUATOR switch

Usually set to OFF. Switch it ON if the sound is distorted when enjoying Karaoke (page 37).

9AUDIO OUT (2 CH) jacks

Use to output two-channel audio (analog) to the audio stereo inputs on a TV or stereo amplifier. If you are connecting to a receiver that has both digital and analog input jacks for DVD player connection, it may be beneficial to make both connections (page 19).

0AUDIO OUT (5.1 CH) jacks

Use to output 6 discrete audio channels of decoded digital audio to a receiver or amplifier with discrete audio inputs (page 19).

-AC IN power cord connection terminal Use to connect the power cord to the wall outlet (page 16).

13

Page 13
Image 13
Pioneer DV-K302CD, DVD-V630 operating instructions Rear Panel