Pioneer DV-K302CD, DVD-V630 Video Settings, Setup screen closes, Settings 2 Channel

7 Use the cursor buttons (5/°) to select a new setting and press ENTER to set the new setting in memory. Press RETURN or the cursor button (2) to exit the options without making any changes.

8 Press RETURN or the cursor button (2) to go back to the main menu bar to select another menu.

9 Press SETUP to close the Setup screen.

The Setup screen closes.

How to interpret the setting indicator colors in the Setup screen menus

When setting up the system, or when making adjustments, it is convenient to know what settings are applicable to the different disc formats. When the settings appear for each menu option, the currently selected setting appears with the setting indicator highlighted in one of three colors: blue, green or yellow. These colors correspond to what formats the menu option effects as shown in the table below.

Color of indicator	Disc format(s)
Blue	DVD only
Yellow	DVD/Super VCD/Video CD
Green	All compatible formats

Notes

•If a setting applicable only to DVDs is changed while a Super VCD/Video CD or CD is loaded, a blue DVD icon appears in the upper right hand corner of the screen to indicate that the setting is not applicable to the currently loaded disc. The setting will be effective the next time a DVD is loaded.

•The blue indicator is shown for the [TV Screen], but the aspect can be switched for Super VCD.

IMPORTANT

Changing the Setup Screen to “Expert” Menu Mode

The Setup screen menus are divided into two levels, “Basic” and “Expert”, to make this unit more convenient to operate for different levels of users. The “Basic” menu mode contains functions that may be considered necessary for the basic operations of this player and helpful on-screen information identified by the

imark. The “Expert” menu mode adds to the “Basic” menu mode additional functions of the player that can be adjusted to further personalize performance of the player. In this manual, functions that are contained in the “Expert ” menu mode are identified by the Expert icon. Make changes to the [Setup Menu Mode] setting in the Setup screen General menu.

	Audio1	2	Video	Language		General
	Setup Menu Mode				Expert
	Setup Navigator				Basic
	Parental Lock – Level 8
	Detailed setup mode
Settings: Expert								Exit
			Move				SETUP
Basic*
Note					* Factory setting

On-screen information only appears in the “Basic” menu mode.

Setting Analog Audio Connections to an AV Amplifier or Receiver

This player is capable of both 2 channel stereo and 5.1 multichannel surround sound audio output. Use this setting to select which analog outputs are connected to an AV component.

Make adjustments in the [Audio Out] setting in the

Setup screen Audio 2 menu.

	1	Audio2	Video	Language		General
			Surround – Off
			Audio DRC – Off
			Audio Out		2 Channel
		Speaker Setting			5.1 Channel
		Setting up audio output
			Move
							SETUP	Exit
Settings: 2 Channel*
5.1 Channel
				* Factory setting
Notes
• This setting can also be changed by using 5.1 CH MODE on
the front panel. However, this button does not work when the
GUI indicator is lit.
• When “5.1 channel” is selected, the front right (R) and front
left (L) audio channels output from the AUDIO OUT (2 CH)
jacks.
• If the center or surround components are not recorded on the
disc, there will be no output from the CENTER or SURROUND
output jacks. This is not a malfunction. Speaker channels can									ADJUSTING
be verified in the program format indicators in the display.
• When “5.1 Channel” is selected at this setting and “Dolby
Digital 3 PCM” is selected in the [Dolby Digital Out] setting in
the Setup screen Audio 1 menu, there is no audio output from
the digital output jacks.									AUDIO
• When 5.1-channel mode is used, MIC vocals are output from
the center speakers, and downmixed disc audio and echo are
output from the front left and right speakers in Karaoke mode.									AND
There is no audio output from the subwoofer or surround left
and right speakers.									VIDEO SETTINGS

31