Preparations (Setup)

Select type of television connected

Sets the type of television connected to the player.

Press the cursor button’s up/down sides (/) to move the cursor to the item desired, then press ENTER button to confirm.

Audio1 A2 Video1 V2 Language General

Setup Navigator

TV Connection

TV Type Widescreen(16:9)

Standard(4:3)

Widescreen TV 16:9 aspect ratio

Move

ENTER Select SETUP Exit

Widescreen(16:9):

Select this option when connecting a television with Widescreen (16:9) aspect ratio.

Standard(4:3):

Select this option when connecting a television with conventional (4:3) aspect ratio.

Select the type of digital signal supported by your amplifier

★Digital output during DJ mode is automatically converted to linear PCM only.

Set the type of digital signal supported by the amplifier connected to the player. (Consult the Operating Instructions for your amplifier when making this setting.)

Press the cursor button’s up/down sides (/) to move the cursor to the item desired, then press ENTER button to confirm.

Audio1 A2 Video1 V2 Language General

 

Setup Navigator

 

Dolby Digital

 

 

 

Dolby Digital/DTS

 

Amp Connection

Dolby Digital/MPEG

 

Digital Jack

Dolby D/DTS/MPEG

 

 

 

PCM

 

 

 

Not Connected

 

Compatible with Dolby Digital

 

 

 

 

 

Move

ENTER Select SETUP Exit

Dolby Digital:

Select this item if you have used a digital audio cable to connect a AV amplifier to the player, and the amplifier supports the Dolby Digital format.

Dolby Digital/DTS:

Select this item if you have used a digital audio cable to connect an AV amplifier to the player, and the amplifier supports Dolby Digital and DTS formats.

Dolby Digital/MPEG:

Select this item if you have used a digital audio cable to connect an AV amplifier to the player, and the amplifier supports Dolby Digital and MPEG formats.

Dolby D/DTS/MPEG:

Select this item if you have used a digital audio cable to connect an AV amplifier to the player, and the amplifier supports Dolby Digital, DTS, and MPEG formats.

PCM:

Select this item if you have used a digital audio cable to connect a stereo or Dolby Pro Logic amplifier.

Not Connected:

Select this item if you have used the accessory analog audio cable to connected an amplifier, or if you do not know whether the amplifier supports digital signals. When this item is selected, the next setting [96kHz PCM Audio] is not required; skip it and go directly to [Exit Setup Navigator].

If your amplifier does not support DTS audio, do not select the [Dolby Digital/DTS] or [Dolby D/DTS/MPEG], since ad- ditional noise may occur.

18

Select whether connected amplifier supports 96 kHz audio

Set this item to reflect whether the connected amplifier supports linear PCM 96 kHz audio.

Press the cursor button’s up/down sides (/) to move the cursor to the item desired, then press ENTER button to confirm.

Audio1 A2 Video1 V2 Language General

Setup Navigator

Amp Connection

No

96kHz PCM Audio

Yes

 

Don't Know

Digital jack not compatible with 96kHz

 

 

Move

ENTER Select SETUP Exit

No:

Connected amplifier does not support linear PCM 96 kHz audio.

Yes:

Connected amplifier does support linear PCM 96 kHz audio.

Don’t Know:

Select this item if you are unsure whether the connected amplifier supports linear PCM 96 kHz audio.

If [No] or [Don’t Know] is selected, DVD audio will be con- verted to 48 kHz for output, regardless of whether it is origi- nally linear PCM 96 kHz.

Exit Setup Navigator

Choices here include: to save the new settings and close Setup Navigator; to abandon (delete) the new settings and close Setup Navigator, or to start over without closing.

Press the cursor button’s up/down sides (/) to move the cursor to the item desired, then press ENTER button to confirm.

Audio1 A2 Video1 V2 Language General

Setup Navigator

Save Changes

Exit Setup Navigator Delete Changes

Start Again

Changes are saved

Move

ENTER Select SETUP Exit

Save Changes:

The new settings will be saved and applied, and Setup Navigator will close.

Delete Changes:

New settings will be abandoned and Setup Navigator will close.

Start Again:

Setup Navigator will return to the [OSD Language] and start settings again.

If [Save Changes] or [Delete Changes] is chosen, the initial setup menu will close.

If [Start Again] is selected, the display will return to the [OSD Language] menu screen.

En <DRB1416>