Preparations (Setup)

MPEG output

Set this option to [MPEG] if the connected amplifier supports MPEG audio.

Audio1

A2

Video1

V2

Language

General

 

 

 

Audio DRC

— Off

 

Dolby Digital Out

— Dolby Digital

 

 

DTS Out

— Off

 

96kHz PCM Out

— MPEG

 

 

MPEG Out

 

MPEG 3PCM

Change MPEG audio output mode

 

 

 

 

 

 

 

 

 

Move

 

 

SETUP Exit

MPEG:

Select this option if the connected amplifier or decoder supports MPEG audio.

MPEG 3 PCM:

MPEG signals are converted to linear PCM for output. Select this option if the connected amplifier does not support MPEG (factory default setting).

Digital output ON/OFF (Expert Mode)

This setting allows disabling of outputs from the digital audio output connectors.

Audio1 A2 Video1 V2 Language General

Audio DRC — Off

Dolby Digital Out — Dolby Digital

DTS Out — Off

96kHz PCM Out — 96kHz 348kHz MPEG Out — MPEG 3PCM

Digital Out On

Off

Move

SETUP Exit

On:

Signals are output from the rear panel digital output connectors (factory default setting).

Off:

Signals are not output from the rear panel digital output connec- tors.

Supports Dolby*1 Digital / DTS*2 for genuine theater-like sound impact

By connecting an amplifier supporting Dolby Digital/DTS, you can enjoy the immediacy and power of 5.1 channel movies and music DVDs.

Equipped with SRS TruSurround

(Virtual Surround)

Recreates the ambience of 5.1 channel sound using only 2 speakers. SRS TruSurround*3 technology performs direct processing of 5.1 channel digital sound data.

*1

Manufactured under license from Dolby Laboratories.

 

“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

*2

“DTS” and “DTS Digital Out” are registered trademarks of Digital Theater Sys-

 

tems, Inc.

 

*3

TruSurround, SRS and

symbol are trademarks of SRS Labs, Inc.

TruSurround technology is incorporated under license from SRS Labs, Inc.

22

[Audio2] settings

See P.20 for menu instructions.

Surround setting

This option is not supported in DJ mode.

This function is supported only when connected to the audio output connectors. Not supported during use of DTS audio, linear PCM 96 kHz audio.

A1 Audio2 Video1 V2 Language General

Virtual Surround Off

Legato TruSurround

Surround effect from 2 speakers

Move

SETUP Exit

Off:

Disabled (factory default setting)

TruSurround:

Select for virtual surround sound.

If [TruSurround] is selected during playback of DVD Dolby Digital 2ch discs, the audio level produced from the digital output connectors will be reduced.

Also note that if the [Audio1] menu item [Dolby Digital Out] is set to [Dolby Digital 3 PCM] when playing discs other than those recorded in Dolby Digital 2ch format, selecting [TruSurround] will cause audio output to be disabled from the digital output connectors.

Some discs may produce less surround effect than others.

Legato PRO function

Select from among the four ambience modes based on your own preferences and the style of music being played. The characteristics of the four modes are as follows:

A1 Audio2 Video1 V2 Language General

Virtual Surround

 

Off

 

Legato PRO

 

Standard

 

 

Effect1

 

 

Effect2

Effect3

Wide Range Digital filter

You can select the quality of sound.

Move

SETUP Exit

Off:

Legato function disabled (factory default setting).

Standard:

Produces full-bodied sound presence.

Effect1:

Produces bright, vivid sound.

Effect2:

Produces sound with depth and reserve.

Effect3:

Produces sound with solid bass and balance.

The Legato PRO function operates to change the audio digital filter response of those bands primarily outside the audio range.

The amount of tonal change may vary, depending on the lis- tening room environment.

En <DRB1416>