Advanced Operations

OUT/

 

 

 

BACK&

RELOOP/

 

 

NORMAL/DJ

 

 

 

 

 

 

 

OUT ADJUST

 

 

 

FORTH

EXIT

 

 

 

 

 

IN/

POWER

OFF ON

 

 

 

DVJ-1000

 

 

 

 

 

 

 

 

STOP

 

 

 

 

 

 

 

 

 

 

 

REALTIME CUE/

TEXT MODE

 

 

 

 

 

 

EJECT

 

 

TIME

AUTO

 

 

 

 

 

UNLOCKLOCK

 

IN ADJUST

MODE

CUE

 

 

 

 

 

 

 

4-BEAT/

 

 

 

 

 

 

 

 

 

 

DVD TITLE

 

 

 

 

 

 

 

ONE-TRACK

 

MP3 FOLDER

ANGLE SUBTITLE AUDIO

DISPLAY

DELETE

MEMORY

MENU T.MENU

RETURN SETUP

 

HOT CUE

HOT CUE

REALTIME CUE

OUT

RELOOP/

4-BEAT

CUE / LOOP

 

TOUCH/BRAKE

 

IN

 

 

 

 

 

 

EXIT

ONE-TRACK

CALL

ENTER

 

A

 

 

 

LOOP

 

 

 

 

 

 

 

 

 

IN ADJUST

OUT ADJUST

 

 

 

 

 

 

B

 

 

 

 

 

 

 

JOG ADJUST

RELEASE/START

 

 

 

 

 

 

 

 

LIGHT

 

 

 

 

 

BACK & FORTH

 

 

 

 

 

 

 

 

 

 

 

 

 

 

HEAVY

 

 

C

 

REC MODE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

HYPERJOG MODE

 

HOT CUE

DIRECTION

 

 

 

 

 

 

JOG MODE

 

REC MODE

 

FWD

 

 

 

 

 

VINYL

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

WIDE

 

 

 

REV

 

 

 

 

 

 

TEMPO

 

DIRECTION

PREVIOUS

NEXT

 

 

 

 

 

 

MASTER TEMPO

 

FWD/REV

 

 

 

 

 

 

 

 

 

 

 

REV

FWD

 

 

 

 

 

 

 

 

REV 1,

 

 

 

 

 

 

 

 

 

 

FWD ¡

 

 

 

 

 

 

 

TEMPO

 

 

 

 

 

 

 

 

 

 

RESET

 

 

 

CUE

 

 

 

 

 

 

 

 

CUE

 

 

 

 

 

 

 

 

 

 

 

PLAY/PAUSE

 

REV

 

 

 

FWD

 

 

PLAY/PAUSE

 

 

 

 

 

 

 

 

 

 

6

 

 

 

 

 

 

 

 

TEMPO

 

Jog dial

■Starting a hot cue

1.Press the HOT CUE REC MODE button so that the HOT CUE A, B, and C button indicators light green or orange.

Buttons containing stored hot cue points will light green.

Buttons containing stored loop information will light orange.

Buttons without any stored information will not light.

2.During playback, pause, or cue standby mode, press one of the buttons with recorded information (A, B, or C).

During playback, pause mode or cue standby mode, if a green or orange lighted button is pressed, playback will begin instantly based on the information recorded in the button. In this case, cue point information stored in the normal CUE button, or loop information stored in the RELOOP/EXIT button will not be overwritten, but remain valid.

Pressing a HOT CUE button with stored loop information causes loop playback to begin instantly based on the stored information. In this case, the RELOOP/EXIT button can be used to cancel the loop playback just as with normal loop play; in addition, the IN/ REALTIME CUE/IN ADJUST button can be used to modify the loop-in point, and the OUT/OUT ADJUST button can be used to modify the loop-out point. If loop information is modified, the loop information stored in the button will simultaneously be modified.

If a memory card is loaded, inserting a disc will allow previously recorded hot cue and loop information for that disc to be restored (☞ P.44).

*When playing a DVD that prohibits title or other searches, it may be impossible to begin playback from the hot cue point.

In this case, the prohibited mark will appear in the display and the similar mark will appear on the monitor screen.

*In the case of MP3, hot cue is supported only within one and the same folder.

Loop playback

★This function is not supported when the rear panel NORMAL/DJ switch is set to the NORMAL position.

■To create a loop

1.Press the PLAY/PAUSE (3/8) button to begin playback.

2.During playback, press the IN/REALTIME CUE/IN ADJUST button.

This step is unnecessary if you wish to use a previously recorded cue point as the loop-in point.

During the time required for writing the loop-in point, the IN/ REALTIME CUE/IN ADJUST button will flash for about 2 sec- onds.

40

3.During playback, press the OUT/OUT ADJUST button at the point you wish to use as the loop-out point.

Repeat play (loop play) will begin without break between the se- lected loop-in and loop-out points.

The frame search function can be used to set more accurate out points.

If an alternate viewing angle or audio channel is selected before setting a loop-out point, it may not possible to designate a loop- out point.

Loop-out points cannot be set during reverse play.

In the case of MP3, looping is possible only within the same track where the cue point was set.

■To cancel loop play

During loop playback, press the RELOOP/EXIT button.

The loop will be canceled and playback will continue normally past the loop-out point.

■To adjust a loop-in point

1.During loop playback, press the IN/REALTIME CUE/IN ADJUST button.

The display will show the loop-in point time, and the IN/REALTIME CUE/IN ADJUST button will flash rapidly, while the OUT/OUT ADJUST button light will go out.

2.Press the REV1/FWD¡ button, or rotate the jog dial.

The loop-in point will be moved in one-frame increments.

The permissible range of loop-in point adjustment is ±30 frames during CD play, or ±6 frames for DVD play, and must be located before the loop-out point.

In the case of MP3 play, loop adjustment can be performed only within the same track where the cue point is set.

The loop-in point cannot be adjusted during reverse play or scratch play.

If the IN/REALTIME CUE/IN ADJUST button is pressed, or 30 seconds is allowed to elapse, the loop adjust mode will be canceled and operation will return to normal loop play.

■To adjsut a loop-out point

1.During loop playback, press the OUT/OUT ADJUST but- ton.

The display will show the loop-out point time, and the OUT/OUT ADJUST button will flash rapidly, while the IN/REALTIME CUE/ IN ADJSUT button indicator turns off.

2.Press the REV1/FWD¡ button, or rotate the jog dial.

The loop-out point will change in one-frame units.

The loop-out point cannot be moved to a location before the loop- in point.

If the OUT/OUT ADJUST button is pressed, or 30 seconds is allowed to elapse, the loop adjust mode will be canceled and op- eration will return to normal loop play.

The loop-out point cannot be adjusted during reverse play.

In the case of MP3 play, loop adjustment can be performed only within the same track where the cue point is set.

■To return to a loop (reloop)

After cancellation of a loop, press the RELOOP/EXIT button during normal playback.

Playback will return to the loop-in point of the previously set loop, and loop play will resume.

In the case of MP3, reloop can be performed only within the same folder.

En <DRB1416>