Settings
Channel Skip/Add
You can simplify the list of channels that you see when you press the up and down arrow buttons. To skip a channel:
1.Select XM ➝ Settings ➝ Preferences ➝ Channel Access ➝ Channel Skip/Add.
2.You will see a list of channels. Press the XM button to skip a channel. You’ll see the
Channel Skip icon 
displayed beside the channel name. You can choose to skip more than one channel.
3.To add a channel that has been skipped, highlight that channel then press the XM button.
4.Press the left arrow button when you’re finished.
5.inno confirms by displaying “Channel List Updated.”
You can still tune to a channel directly by using the virtual keypad to enter its channel number.
Channel Skip/Add should not be used as a form of parental control. To completely block access to an XM channel, contact XM Listener Care at
Settings
Clock and Sleep Timer
Time
1.The time is automatically set using the XM signal. Select XM ➝ Settings ➝ Setup ➝ Set Time ➝ Set Clock ➝ Select Time Zone to set the correct time zone for your
location.
2.Your inno automatically adjusts for Daylight Savings Time. To turn this feature off,
select XM ➝ Settings ➝ Setup ➝ Set Time ➝ Set Clock ➝ Daylight Savings Time ➝ No.
3.To display time in 12- or
Sleep Timer
Your inno has a sleep timer that can automatically shut off the unit after a period of time.
1.Select XM ➝ Settings ➝ Setup ➝ Set Time ➝ Sleep Timer.
2.Select the desired time period.
3.Press the XM button to confirm the selection. Your inno will remember this setting the next time you turn it on.
The sleep timer resets to “Off” every time you turn inno off.
74 | Settings | Settings 75 |
