Installation and assembly instructions
1Slide center support column into brackets on the base and use short hexagonal bolts to fix it into place (4 locations).
Center support column |
|
Short hexagonal bolts |
|
(M8 x 16 mm: black) |
|
Base | Slide into |
| brackets |
2Use short hexagonal bolts to attach PDP bracket to center support column (bolts must be screwed in four locations).
The bracket may be screwed into the upper holes, middle holes, or lower holes of the center support column to adjust the height of the display. The middle holes are designed to be used for standard installation.
(Stand shown below is a 43-inch display stand)
Locations of holes on center support column for attach- ment of PDP bracket
Upper | Upper |
|
holes | holes |
|
Middle | Middle | English |
holes | holes | |
|
| |
Lower | Lower |
|
holes | holes |
|
3Attach the long support legs or short support legs to the PDP bracket with the short hexagonal bolts (4 locations).
Table of parts included with each plasma display
|
| One body type | ||||
Plasma Display | ||||||
plasma display | ||||||
|
| |||||
|
|
| ||||
|
|
|
|
|
| |
Location of speaker | Side | Side | Under | – | ||
|
|
|
|
|
| |
Support legs attachment | A | A | B | B | ||
method |
| |||||
|
|
|
|
| ||
|
|
|
|
|
| |
| Support legs | Short ⋅2 | Short ⋅2 | Long ⋅2 | Long ⋅2 | |
|
|
|
|
|
| |
| Plasma display |
|
|
|
| |
| attachment use | Middle ⋅2 | Middle ⋅2 | Middle ⋅2 | Long ⋅2 | |
Used | top hexagonal | |||||
|
|
|
| |||
bolts |
|
|
|
| ||
parts |
|
|
|
| ||
|
|
|
|
| ||
| Plasma display |
|
|
|
| |
| attachment use | Middle ⋅2 | Middle ⋅2 | Middle ⋅2 | Middle ⋅2 | |
| bottom hexagonal | |||||
|
|
|
|
| ||
| bolts |
|
|
|
| |
|
|
|
|
|
| |
Unused | Support legs | Long ⋅2 | Long ⋅2 | Short ⋅2 | Short ⋅2 | |
|
|
|
|
| ||
parts | Hexagonal bolts | Long ⋅2 | Long ⋅2 | Long ⋅2 | Middle ⋅2 | |
| ||||||
|
|
|
|
|
| |
PDP bracket |
Short hexagonal bolts |
(M8 x 16 mm: black) |
Slide grooves |
into place |
Note
Be sure to carefully store the unused support legs, the bolts, the hexagonal wrench, and the Operating Instructions together.
AWhen installing speakers at the sides of the plasma display
Use the short support legs.
Use the hexagonal wrench included with the stand to do so.
Short support legs |
Short hexagonal bolts |
(M8 ⋅ 16 mm: black) |
Short support |
legs |
Slide grooves |
into place |
PDP bracket |
11
En
