Pioneer PDP-5020FD, PDP-6020FD

03 Basic Operations For Television Viewing

Picture Image Position

Each input source stores the picture adjustment settings for that view. Although repositioning is available in most

screen views, when the screen is set to Dot-by-Dot, the Position menu is unavailable. Also, depending on the

displayed video, the image position may not change after an adjustment.

To adjust the picture’s horizontal and vertical position, follow the steps below.

1 ) Access the

Option

through the

Setup

2 ) Select

Posit ion

from the Option menu.

3 ) Select

H/V Position Adjust

from the submenu.

4 ) Adjust the vertical and/or horizontal positioning using the arrow buttons.

5 ) Press HOME MENU to exit the menu.

Restore Default Picture

After making multiple adjustments, it may be difficult to reverse improper settings. To restore the factory default

video settings, follow the directions below.

1 ) Highlight

Reset

from the Picture menu.

2 ) Press ENTER to continue with the picture reset.

A confirmation screen appears asking if settings should be returned to the factory defaults.

3 ) Use the arrow buttons to highlight

Yes

4 ) Press ENTER.

All video settings return to the original default values when selecting options other than OPTIMUM or PC.

When OPTIMUM is selected, video settings for OPTIMUM, AV Selection menus, and Sound Control

settings return to the original default values.

3.4.3 Compare Images When Adjusting the Picture

When adjusting the picture, look for an overall improvement by adjusting each parameter or option one at a time.

Many sm all adju stments lead to the best picture for you r viewin g area. A s each o ption ch anges, refer ba ck to the

previously set image for comparison. This section includes adjustment notes and steps to adjust the flat panel

TV’s picture.

Each parameter/option must be adjusted separately. For example, if two options under AV Selection,

PERFORMANCE and MOVIE need adjustment, change/compare one option then save the preferred setting

before moving on to the other option. Below are other guidelines to follow when adjusting the picture.

• Adjustments are available while on the After scre en. T ryin g to m ake a djus tmen ts wh ile o n the

Before

causes

a warning message to appear.

• Switch to another parameter/option only from the

After

screen. If viewing the

Before

screen when selecting

another option, the

Before

data is lost.

• Exiting an option from the

Before

screen stores that previous entry in memory and deactivates the TOOLS

button.

• Exiting an option from the

After

screen stores the new entry in memory and deactivates the button.

Position

Auto Size : Off

Side Mask

HDMI Input

HDMI Control Setting

Orbiter : Off

Video Pattern

PDP6020FD.book Page 44 Monday, March 17, 2008 10:51 AM