Pioneer XV-DV313, S-DV313 Using the Room Setup, Setting up the remote to control your TV

Getting started

03

6 Use the (cursor up/down) buttons to set the minute.

7 Press ENTER to confirm.

The display flashes to indicate the clock is set.

•Press TIMER/CLOCK anytime to display the clock.

•If you unplug the system from the wall outlet, or there is a power outage, you will need to set the clock again.

Setting up the remote to control your TV

You can set up the supplied remote to control your TV using the TV CONTROL buttons.

1Switch on your TV.

2Find the name of the manufacturer of your TV in the Preset code list on page 84 Next to each manufacturer is one or more three digit codes. These tell the remote what kind of TV you have.

If the name of the manufacturer of your TV does not appear in the table, you won’t be able to set up this remote to control your TV.

3Point the remote at your TV, hold down the CLR button, then enter the three digit code for your TV.

The remote transmits an on/off signal to the TV. If you’ve entered the correct code, your TV should switch off.

If your TV doesn’t turn off, repeat the procedure using the next code in the list until your TV switches off successfully. Once set, you can then use the individual TV controls shown below.

MASTER

VOLUME

TV CONTROL

	CH	INPUT	VOL
	BASS MODE DIALOGUE		VIRTUAL SB
	AUTO	SURROUND	ADVANCED
	PROGRAM	REPEAT	RANDOM
Button	What it does

Switches your TV on or into standby.

CH +/– Changes the TV channel.

VOL +/– Adjusts the volume.

INPUT Switches the TV’s input between the built in TV tuner and an external video source.

• The default setting is for a Pioneer TV.

Using the Room Setup

Before using your system to enjoy surround sound playback, we recommend you spend a few minutes using the Room Setup. This is a quick and easy way to get good surround sound for your room.

Depending on the distance of the surround speakers from your main listening position, choose between S (small), M (medium), or L (large) room, then depending on your seating position relative to the front and surround speakers, choose Fwd (forward), Mid, or Back.

English Italiano Français Deutsch Nederlands Español

19

En