Pioneer XV-DV313, S-DV313 operating instructions Additional information

Additional information

Chapter 13

Additional information

13

English

Switching off the demo

• Default setting: Demo On

This system has an automatic demo feature that starts when the system is plugged in for the first time.

1Switch the system into standby.

2Press SYSTEM SETUP.

3 Use the (cursor left/right) buttons to select ‘Demo Mode?’, then press ENTER.

4 Use the (cursor up/down)

buttons to select ‘Demo Off?’ then press ENTER to confirm.

•After setting the clock, the demo mode switches off automatically. However, if you unplug the system from the wall outlet, the demo mode will revert to Demo On (and the clock will be reset).

Child Lock

• Default setting: Lock Off

This system has a child lock feature that makes the front panel buttons and controls inoperative. This is useful when you’ve set the wake-up timer and don’t want the system switched on before it activates.

1Switch the system into standby.

2Press SYSTEM SETUP.

3 Use the (cursor left/right) buttons to select ‘Child Lock?’, then press

ENTER.

4 Use the (cursor up/down) buttons to select ‘Lock On?’ or ‘Lock Off?’.

5 Press ENTER to confirm.

Changing the clock format

• Default setting: 12-Hour

You can choose to display the clock in either 12 or 24 hour formats.

1Switch the system into standby.

2Press SYSTEM SETUP.

3 Use the (cursor left/right) buttons to select ‘12/24 Hour?’, then press

ENTER.

4 Use the (cursor up/down) buttons to select either ‘12-Hour?’ or ‘24- Hour?’.

5 Press ENTER to confirm.

Setting the TV format

• Default setting: AUTO

The default setting of this system is AUTO, and unless you notice that the picture is distorted when playing some discs, you should leave it set to AUTO. If you experience picture distortion with some discs, set the TV system to match your country or region’s system. Doing this, however, may restrict the kinds of disc you can watch. The table below shows what kinds of disc are compatible with each setting (AUTO, PAL and NTSC).

Italiano Français Deutsch Nederlands Español

73

En