Pioneer XV-DV313 Using the Scart AV output, Switching the TV audio input from Scart to RCA

Other connections 12

•Use a component video cable (not supplied) to connect the COMPONENT VIDEO OUT to a set of component inputs on your TV.

COMPONENT

INPUT

TV

ANTENNA UNBAL ANTENNA

Y PB PR

COMPONENT VIDEO OUT

XV–DV313

•Use a commercially available SCART cable to connect the AV CONNECTOR to your TV.

TV

		IN	IN	OUT		OPTICAL IN
FRONT	CENTER	SURROUND			L	AUDIO
6	6	6				LINE 2		ANTENNA FM	AM
		L			R		AV CONNECTOR	UNBAL 75Ω	LOOP ANTENNA
		TV	AUDIO	LINE 1
		R				AC IN
6	6	6
						VIDEO
	SUB
	WOOFER					OUT

VIDEO

XV-DV313

•SCART cables are available in several configurations. Make sure that the one you get will work with this system and your TV/monitor. You can find the pin assignments below.

English Italiano Français Deutsch

•The component video ouptut is switchable between interlaced and progressive formats. See Component Out on page 61 for more on this.

Using the SCART AV output

European model only

There are two different kinds of video outputs you can use to connect this system to your TV. The SCART output should give you better picture quality than the standard composite video output. The SCART AV connector functions as both a video and audio output.

Switching the TV audio input from SCART to RCA

You can set the TV audio input to RCA or

SCART.

1Press TV.

2Press SYSTEM SETUP.

3	Use the	(cursor left/right)
buttons to select ‘TV Audio?’.
4	Press ENTER.
5	Use the	(cursor up/down)
buttons to select SCART or RCA.
6	Press ENTER

Nederlands Español

71

En