Pioneer S-DV313 Connecting using the S-video output, Connecting using the component video output

12Other connections

Recording mode

The Recording mode allows you to make analog recordings from the LINE 1 (OUT) jacks.

When Recording mode is on, most sound- related functions (including SURROUND,

ADVANCED, AUTO, SYSTEM SETUP) become inactive. The display will briefly blink RecMode On if you try and use a prohibited function while Recording mode is on.

When Recording mode is off, the audio from the analog output may be interrupted, depending on the operation.

1	Press SOUND.
2	Use the	(cursor left/right)
buttons to select ‘Rec Mode?’.
3	Press ENTER.
4	Use the	(cursor up/down)

buttons to select ‘R.Mode On’ or ‘R.Mode Off’.

Connecting using the S-video output

Not applicable to the European model

If your TV has an S-video input, you can use this instead of the standard video output for a better quality picture.

•Use an S-video cable (not supplied) to connect the S-VIDEO OUT to an S-video input on your TV.

Line up the small triangle above the jack with the same mark on the plug before plugging in.

S-VIDEO

INPUT

TV

OPTICAL IN

AUDIO

LINE 2

	ANTENNA		FM	AM
			UNBAL 75Ω	LOOP ANTENNA
S-VIDEO	VIDEO	Y	PB	PR
OUT	OUT
VIDEO		COMPONENT VIDEO OUT

XV–DV313

•The S-video ouptut is switchable between S1 and S2 formats for compatibility with all TVs. See S-Video Out on page 62 for more on this.

Connecting using the component video output

Not applicable to the European model

If your TV has component video inputs, you can use these instead of the standard video output to connect this system to your TV. This should give you the best quality picture from the three types of video output available.

70

En