USING DJ SOFTWARE

For DJS:

Control can be performed while viewing the center display’s BROWSE, EFFECT, and MIX screens. For details of actual operation, consult the chapter on “Manipulator Style” operation of the SEP-C1 DJS Control Guide (PDF file on accessory CD-ROM).

MEMO

While the UTILITY screen is being displayed on the center display, the center display’s buttons and rotary selector dial cannot be used to control DJ software.

USING MIDI FOR COMPUTER CONTROL

MIDI (Musical Instrument Digital Interface) is a standardized protocol used to govern data transmission between electronic musical instruments and computers.

The SEP-C1 uses the MIDI message format to output its operating data and status to a computer connected by USB cable. By using a DJ software program with USB MIDI support to assign the MIDI messages output by the SEP-C1, the SEP-C1 can be used to control the DJ software.

For more information regarding messages output by the SEP-C1, consult the section “MIDI MESSAGE TABLE” (P. 23).

1Connect to the computer.

The center display will show the [PRO DJ] logo.

2Start the DJ software program.

When communication is established with the DJ program, the SEP-C1 operates as a MIDI controller, and the status of controller A/B and center display section’s buttons and controls are output as MIDI messages.

MEMO

While the UTILITY screen is being displayed on the center display, the center display’s MIDI messages are not output.

Setting a MIDI channel

MIDI channel setting can be performed from the UTILITY screen.

1Press the UTILITY button.

2Press the [PC] function button.

The center display will show the MIDI channel setting menu.

Controller A uses the same channel as the center display, while controller B uses a different channel. (Factory defaults are for Controller A and center display to be set to Channel 1, and Controller B set to Channel 2).

3Either press the rotary selector dial, or press the select down

() button.

The icon will move to the right.

4Turn the rotary selector dial to change the value. Values between 1 and 16 can be set.

5Press the rotary selector dial to confirm the value selected.

Press the select up () button to cancel the selection and return to the UTILITY screen.

22

En

Page 22
Image 22
Pioneer SEP-C1 operating instructions Using Midi for Computer Control, For DJS,  Setting a Midi channel