Pioneer SRC7127-B/N Selecting AUX as the source, Setting the AUX title, 02Operating this unit

Section

02Operating this unit

% Use an IP-BUS-RCA Interconnector such as the CD-RB20/CD-RB10 (sold separetely) to connect this unit to auxiliary equipment featuring RCA output.

For more details, refer to the IP-BUS-RCA Inter- connector owner’s manual.

The allocation of this auxiliary equipment is

automatically set to AUX2.

# You can only make this type of connection if the auxiliary equipment has RCA outputs.

Selecting AUX as the source

%Press SOURCE to select AUX (AUX1 or

AUX2) as the source.

# If the auxiliary setting is not turned on, AUX cannot be selected. For more details, see Switch- ing the auxiliary setting on page 22.

Setting the AUX title

The title displayed for each AUX1 or AUX2 source can be changed.

1After you have selected AUX as the source, press FUNCTION and hold until TITLE IN appears in the display.

2Enter a title in the same way as the built-in CD player.

For details concerning operation, refer to En- tering disc titles on page 14.

24 En