03Connecting your equipment
Connecting external antennas
To improve FM reception connect an external FM antenna to the FM UNBAL 75 Ω terminal.
75 Ω coaxial cable
ANTENNA
FM UNBAL 75 Ω
AM LOOP
To improve AM reception, connect a 5 m to 6 m length of
For the best possible reception, suspend horizontally outdoors.
Plugging in the receiver
Only plug in after you have connected all your components to this receiver, including the speakers.
Caution
• Handle the power cord by the plug part. Do not pull |
out the plug by tugging the cord, and never touch the |
power cord when your hands are wet, as this could |
cause a short circuit or electric shock. Do not place |
the unit, a piece of furniture, or other object on the |
power cord or pinch the cord in any other way. Never |
make a knot in the cord or tie it with other cables. The |
power cords should be routed so that they are not |
likely to be stepped on. A damaged power cord can |
cause a fire or give you an electric shock. Check the |
power cord once in a while. If you find it damaged, |
ask your nearest Pioneer authorized independent |
service company for a replacement. |
• The receiver should be disconnected by removing the |
mains plug from the wall socket when not in regular |
use, e.g., when on vacation. |
ANTENNA
FM UNBAL 75 Ω
Outdoor antenna
Indoor antenna
5 m to 6 m
AM LOOP
• Make sure the blue STANDBY/ON light has gone |
out before unplugging. |
• Plug the power cord into a power outlet. |
20
En
