Pioneer VSX-516-S/-K Choosing the input signal, Using surround back channel processing

Listening to your system

•While listening to a source, press

ACOUSTIC EQ.

Press repeatedly to select between:

•ALL CH – No special weighting is given to any one channel.

•F. ALIGN – All speakers are heard in accordance with the front speaker settings.

•CUSTOM 1/2 – Custom settings

•EQ OFF – Switches Acoustic Calibration EQ off.

The MCACC indicator on the front panel lights when Acoustic Calibration EQ is active.1

Choosing the input signal

• Default setting: AUTO

You need to hook up a component to both analog and digital inputs on the rear of the

receiver to select between input signals.2

•Press SIGNAL SELECT (front panel) to select the input signal corresponding to the source component.

Each press cycles through the following:

•AUTO – This automatically switches to DIGITAL if a digital source is detected, otherwise it remains on ANALOG

•ANALOG – Selects the analog inputs

•DIGITAL – Selects the digital input

When set to DIGITAL or AUTO, 2 DIGITAL lights when a Dolby Digital signal is input, and DTS lights when a DTS signal is input.

Using surround back channel processing

VSX-516 model only

• Default setting: SB ON

You can have the receiver automatically use 6.1 decoding for 6.1 encoded sources (for example, Dolby Digital EX or DTS-ES), or you can choose to always use 6.1 decoding (for example, with 5.1 encoded material). With 5.1 encoded sources, a surround back channel will be generated, but the material may sound better in the 5.1 format for which it was origi- nally encoded (in which case, you can simply

switch surround back processing off).3

The table below indicates when you will hear the surround back channel ( =Sound plays through surround back speaker).

•Press SB ch PROCESSING to select a surround back channel option.

Each press cycles through the following:

•SB ON – 6.1 decoding is always used (for example, a surround back channel will be generated for 5.1 encoded material)

•SB AUTO – Automatically switches to 6.1 decoding for 6.1 encoded sources (for example, Dolby Digital EX or DTS-ES)

•SB OFF – Maximum 5.1 playback

06

English Deutsch Français Italiano Nederlands Español

Note

1• You can’t use Acoustic Calibration EQ with DVD 5.1ch or WMA9 Pro, and it has no effect when headphones are connected.

•If you switch on Acoustic Calibration EQ when DIRECT is selected, the receiver automatically switches to STEREO.

2• This receiver can only playback Dolby Digital, PCM (32 kHz to 96 kHz), DTS and WMA9 Pro digital signal formats. With other digital signal formats, set to ANALOG.

•You may get digital noise when a LD or CD player compatible with DTS is playing an analog signal. To prevent noise, make the proper digital connections (page 12) and set the signal input to DIGITAL.

•Some DVD players don’t output DTS signals. For more details, refer to the instruction manual supplied with your DVD player.

3You can’t use the surround back channel with headphones, the STEREO / DIRECT mode, or if the surround back speaker is set to NO in Speaker setting on page 38.

31

En