Pioneer VSX-516-S/-K The System Setup menu, Fine Channel Level, Fine Speaker Distance

The System Setup menu 07

•CH LEVEL – Make fine adjustments to the overall balance of your speaker system (see Fine Channel Level below).

•SP DISTN. – Make precise delay settings for your speaker system (see Fine Speaker Distance below).

The last five settings are specifically for customizing the parameters explained in Acoustic Calibration EQ on page 36:

•EQ A. SET – Measure the acoustic characteristics of your room and automatically adjust the frequency balance of your speaker system (see Setting the Acoustic Calibration EQ automatically on page 36).

•EQ COPY – Copy Acoustic Calibration EQ settings for manual adjustment (see Copying your Acoustic Calibration EQ settings on page 36).

•C1 ADJ/C2 ADJ – Make detailed manual adjustments to your custom Acoustic Calibration EQ settings (see Setting the Acoustic Calibration EQ manually on page 37).

•EQ CHECK – Check the ALL CH, F. ALIGN and custom settings (see Checking your Acoustic Calibration EQ settings on page 37).

Fine Channel Level

• Default setting: 0dB (all channels)

You can achieve better surround sound by properly adjusting the overall balance of your speaker system. The following setting can help you make detailed adjustments that you may not achieve using the Automatically setting up for surround sound (MCACC) on page 9.

1Select ‘CH LEVEL’ from the Manual MCACC setup menu.

You’ll hear test tones from each speaker in turn. Since the left speaker is the main reference speaker, the level is fixed.

		Caution			English
• The test tones used in the System Setup
	are output at high volume (the volume
	increases to –18 dB automatically).
2 Use			to select each channel in turn
					Deutsch
and adjust the levels (+/– 10 dB) as necessary.
Use			to adjust the volume of the selected
speaker to match the reference speaker. When
it sounds like both tones are the same volume,
press			(cursor down) to continue to the next
channel.					Français
	speaker you select.
• For comparison purposes, the reference
	speaker will change depending on which
• If you want to go back and adjust a
	channel, simply use			to select it.
					Italiano
3 When you're finished, press RETURN.
You will return to the Manual MCACC setup
menu.
Fine Speaker Distance
					Nederlands
• Default setting: 3 m				(all channels)
For proper sound depth and separation with
your system, it is necessary to add a slight bit
of delay to some speakers so that all sounds
will arrive at the listening position at the same					Español
time. The following setting can help you make

detailed adjustments that you may not achieve using the Automatically setting up for surround sound (MCACC) on page 9.

1Select ‘SP DISTN.’ from the Manual MCACC setup menu.

2 Use to adjust the distance of the left channel from the listening position then press ENTER.

3 Use	to select each channel in turn
and adjust the distance as necessary.
Use	to adjust the delay of the selected

speaker to match the reference speaker. The delay is measured in terms of speaker distance from 0.1 to 9.0 meters.

35

En