Pioneer VSX-516-S/-K operating instructions Additional information, Problem, Remedy

Additional information

Problem	Remedy
No sound from surround or	• Connect the speakers properly (refer to page 17).
center speakers.	• Refer to Speaker setting on page 38 to check the speaker settings.
	• Refer to Channel level on page 39 to check the speaker levels.
No sound from surround back	• Refer to Speaker setting on page 38 to check the surround back
speaker (VSX-516 model only).	speaker settings.
	• Refer to Channel level on page 39 to check the speaker levels.
	• Refer to Using surround back channel processing on page 31 to
	make sure surround back channel processing and the sound mode
	are set for surround back sound.
No sound from subwoofer.	• Make sure the subwoofer is switched on.
	• If the subwoofer has a volume knob, make sure it’s turned up.
	• The Dolby Digital or DTS source you are listening to may not have
	an LFE channel.
	• Switch the subwoofer setting in Speaker setting on page 38 to YES
	or PLUS.
	• Switch the LFE Attenuator Setup on page 40 to LFEATT 0 or LFEATT
	10.
Noise during playback of a	• Move the cassette deck further from your receiver, until the noise
cassette deck.	disappears.
No sound is output or a noise	• Set the digital volume level of the player to full, or to the neutral
is output when software with	position.
DTS is played back.
During a playback search,	• This is not a malfunction, but be sure to turn the volume down to
noise is output from a DTS	prevent the output of loud noise from your speakers.
compatible CD player.
Can’t operate the remote	• Replace the batteries (refer to page 5).
control.	• Operate within 7 m, 30° of the remote sensor on the front panel
	(refer to page 5).
	• Remove the obstacle or operate from another position.
	• Avoid exposing the remote sensor on the front panel to direct light.
The display is dark or off.	• Press DIMMER on the remote repeatedly to return to the default.

11

English Deutsch Français Italiano Nederlands Español

51

En