06Listening to your system
Using Virtual Surround Back (VSB)
When you’re not using surround back speaker, selecting this mode allows you to hear a virtual surround back channel through your surround speakers. You can choose to listen to sources with no surround back channel information, or if the material sounds better in the format (for example, 5.1) for which it was originally encoded, you can have the receiver only apply this effect to 6.1 encoded sources like Dolby
Digital EX or
•Press SB ch PROCESSING / VSB MODE to select a virtual surround back channel option. Each press cycles through the following:
•VSB ON – Virtual Surround Back is always used (for example, on 5.1 encoded material)
•VSB AUTO
•VSB OFF – Virtual Surround Back mode is switched off
| SBch |
| Standard |
| Advanced |
Type of source | Processing / | Multichannel | Stereo sources |
| |
| |||||
Virtual SB |
| surround | |||
|
|
| |||
| mode | sources | 2 Pro Logic II x 2 Pro Logic | Neo:6 |
|
|
|
|
|
|
|
Dolby Digital | ON |
|
|
| a |
WMA9 Pro encoded |
|
|
|
|
|
multichannel sources with | AUTO |
|
|
| a |
6.1ch surround |
|
|
|
|
|
|
|
|
|
|
|
Dolby Digital/DTS/WMA9 Pro | ON |
|
|
| a |
encoded multichannel |
|
|
|
|
|
sources | AUTO |
|
|
| a |
|
|
|
|
|
|
Dolby Digital/DTS/WMA9 Pro | ON |
| a,b |
| a |
encoded stereo source; other |
|
|
|
|
|
AUTO |
|
|
|
| |
digital stereo source |
| c |
| a | |
|
|
|
|
|
|
Analog | ON |
| b |
|
|
sources |
|
|
|
|
|
| AUTO |
| c |
|
|
|
|
|
|
|
|
aExcluding WMA9 Pro format
bOnly applicable when using the Virtual Surround Back mode.
cNot applicable when using the Virtual Surround Back mode.
Note
1• You can’t use virtual surround back with headphones, the STEREO / DIRECT mode, or if the surround speaker is set to NO in Speaker setting on page 38
•Depending on the input signal and the Listening Mode, the Virtual Surround Back mode may not be effective.
32
En