Controls and displays | 05 |
HDD/DVD*
These buttons switch between the hard disk and DVD controls for DVD/HDD recorders.
REC STOP*
Stops recording.
8Number buttons and other component controls
Use the number buttons to directly select a radio frequency (page 41) or the tracks on a CD, DVD, etc.
DISC (ENTER) can be used to enter commands for TV or DTV, and can also be used to select a disc in a
TUNER DISP*
Switches between named station presets and radio frequencies (page 42).
CLASS*
Switches between the three banks (classes) of radio station presets (page 41).
MPX*
Switches between stereo and mono reception of FM broadcasts. If the signal is weak then switching to mono will improve the sound quality (page 41).
D. ACCESS*
After pressing, you can access a radio station directly using the number buttons (page 41).
9 INFO
Use to bring up information screens on a digital TV.
10 SHIFT
Press to access the ‘boxed’ commands (above the buttons) on the remote. These buttons are marked with an asterisk (* ) in this section.
11 Remote control LED
Lights when a command is sent from the remote control.
12 SOURCE
Press to turn on/off other components connected to the receiver (see page 44 for more on this).
13 RECEIVER
Switches the remote to control the receiver (used to select the green commands above the number buttons (SETUP, etc). Also use this button to set up surround sound (page 8, page 34).
14 TV CONTROL buttons
These buttons are dedicated to control the TV assigned to the TV CTRL button. Thus if you only have one TV to hook up to this system assign it to the TV CTRL MULT CONTROL button. If you have two TVs, assign the main TV to the TV CTRL button (see page 44 for more on this).
Use to turn on/off the power of the TV.
INPUT SELECT
Use to select the TV input signal.
TV CH +/–
Use to select channels.
TV VOL +/–
Use to adjust the volume on your TV.
English Deutsch Français Italiano Nederlands Español
25
En
