Pioneer VSX-90TXV operating instructions Multi Zone Setup, Volt Trigger setup, 09Other Settings

09Other Settings

1Select ‘Video Conv. Setup’ from the Other Setup menu.

6.Other Setup			6e. Video Converter Setup
	a.DRC	Setup
	b.Dual	Mono Setup	Video Conv.
	c.LFE	ATT Setup		ON
	d.SR+	Setup
	e.Video Conv. Setup
	f. Multi Zone Setup
	g.12V Trigger Setup
		:Return		:Finish

2Choose the setting that you want.

•ON – All analog video signals are output from the MONITOR VIDEO OUT jacks.

•OFF – No conversion between video formats.

3When you're finished, press RETURN.

You return to the Other Setup menu.

Multi Zone Setup

• Default setting: Variable

If you’ve made MULTI-ZONE connections (see MULTI- ZONE listening on page 50) you may need to specify your volume setting.

1Select ‘Multi Zone Setup’ from the Other Setup menu.

6. Other Setup			6f. Multi Zone Setup
	a.DRC	Setup	Volume Level
	b.Dual	Mono Setup		Variable
	c.LFE	ATT Setup
	d.SR+	Setup
	e.Video Conv. Setup		Be careful of loud
	f. Multi Zone Setup
	g.12V Trigger Setup		volume when "FIXED"
			is selected.
		:Return		:Finish

2Select the volume level setting.

•Variable – Use this setting if you’ve connected a power amplifier in the sub zone (this receiver is simply being used as a pre-amp) and you will be using this receiver’s controls to adjust the volume.1

•Fixed – Use this setting if you’ve connected a fully integrated amplifier (such as another Pioneer VSX receiver) in the sub zone and want to use that receiver’s volume controls (this setting is not available if the surround back system setting is set to ZONE2).

With the Fixed setting, the source is sent from this receiver at maximum volume, so make sure the volume is quite low in the sub zone at first and then experiment to find the correct level.

3When you're finished, press RETURN. You return to the Other Setup menu.

12 Volt Trigger setup

• Default setting: OFF (all components)

After connecting a component the 12 volt trigger (see Switching components on and off using the 12 volt trigger on page 52), it switches on automatically when you select an input function set to switch the trigger on. Specify which input functions switch on the trigger below.

1Select ‘12V Trigger Setup’ from the Other Setup menu.

6. Other Setup			6g. 12V Trigger Setup
	a.DRC	Setup	DVD / LD
				OFF
	b.Dual	Mono Setup	TV / SAT	[ OFF ]
	c.LFE	ATT Setup	DVR1	[ OFF ]
	d.SR+	Setup	DVR2	[ OFF ]
	e.Video Conv. Setup		VIDEO	[ OFF ]
	f. Multi Zone Setup		TUNER	[ OFF ]
	g.12V Trigger Setup		CD-R	[ OFF ]
			CD	[ OFF ]
			XM RADIO	[ OFF ]
		:Return	( Next)	:Finish

2Select an input function and choose the setting that you want.

This should be the input function, that when selected, switches on the 12 volt trigger.

6g. 12V Trigger Setup

DVD / LD	ON
TV / SAT	[ OFF ]
DVR1	[ OFF ]
DVR2	[ OFF ]
VIDEO	[ OFF ]
TUNER	[ OFF ]
CD-R	[ OFF ]
CD	[ OFF ]
XM RADIO	[ OFF ]
( Next)	:Finish

•OFF – 12 volt trigger is not activated for the selected component.

•ON – 12 volt trigger is activated for the selected component.

3Repeat for as many input functions as you would like to set.

4When you're finished, press RETURN.

You return to the Other Setup menu.

Note

1 If you selected ZONE2 in the Surround back speaker setting on page 35, you won’t be able to change the volume level.

58

En