STANDBY | TUNING |
| 1 | ) | ! | Ú |
|
|
| $ | Ý |
STANDBY/ON | 2 | ) |
| & |
BASS/TREBLE |
|
|
|
|
| 3 | ) |
| #* |
|
| CD SELECT | OPEN/CLOSE | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
FUNCTIONVOLUME
DISPLAY/
CLOCK
TIMER
ENTER (DEMO)
DISPLAY/ ENTER CLOCK
DISPLAY /CLOCK
POWER
4 | ENTER | ¢ |
REMOTE CONTROL UNIT
4 Getting Started
Setting the clock | English | |
This system has a built in clock, which needs to be set to be able to use the timer features. | ||
| ||
Note: If there is a power failure or the system is unplugged from the wall outlet, the |
| |
display shows AM 12:00 once power is restored until you set the clock again. |
| |
1 Switch on. |
| |
| ||
You can use the STANDBY/ON button on the top panel, or the POWER button on |
| |
the remote control. |
|
2Press and hold the DISPLAY/CLOCK button until the display shows TIME?.
3Press ENTER.
The display shows AM 12:00, with the hour blinking.
4Use the 4 and ¢ buttons to set the hour, then press ENTER.
5 Use the 4 and ¢ buttons to set the minute, then press ENTER.
Switching on the clock in standby
If you want to display the time when the system is in standby, the clock can be set to appear in your display. However, to consume less power, you can leave the clock off (this is the default setting).
1Switch on.
You can use the 
STANDBY/ON button on the top panel, or the 
POWER button on the remote control.
2Press and hold DISPLAY/CLOCK until the display shows TIME?.
3Use the 4 or ¢ button to select TIME ON or TIME OFF.
Set to TIME ON if you want to be able to display the time when the system is in standby. This may be convenient, but the standby power consumption is higher.
Set to TIME OFF if you don't need the clock display in standby. Standby power consumption is lower on this setting.
4Press ENTER.
Tip
If you have chosen the TIME OFF setting, you can still display the clock for 4 seconds in standby by press DISPLAY/CLOCK.
When set to TIME ON, the clock is displayed after switching the system into standby. If you press 
STANDBY/ON (top panel) / 
POWER (remote) again within 2 seconds of the clock being displayed, the system remains in standby, but the clock display disappears.
15
En
