Pioneer X-MT2000 manual Connecting the speakers, External FM antenna

External FM antenna

Connect an outdoor FM antenna as shown below.

75Ω coaxial cable

	SPEAKERS
Red	Red
Black	Black

Speaker terminals on the rear panel

Connecting the speakers

When connecting or disconnecting speakers, make sure that the power is switched off and the unit unplugged from the wall outlet.

To get the best sound from the system, it’s important that the red (+) and black (–) speaker terminals on the rear of the unit are connected to the corresponding terminals on each speaker. The wires and terminals are color-coded to make this easier.

Important: Make sure that the bare speaker wires cannot touch each other, or come into contact with other metal parts once the unit is switched on.

BlackRed

Speaker terminals on the rear of each speaker

10

1 Insert a wire into each speaker terminal on the rear of the unit.

2 Insert the speaker wires into the terminals on the rear each speaker.

To open a terminal, press down on the tab. Insert the wire then release the tab to secure it.

En