STANDBY | TUNING |
| 1 | ) | ! | Ú |
|
|
| $ | Ý |
STANDBY/ON | 2 | ) |
| & |
BASS/TREBLE |
|
|
|
|
| 3 | ) |
| #* |
|
| CD SELECT | OPEN/CLOSE | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CD 1
CD 2
CD 3
PLAY MODE
REMOTE CONTROL UNIT
4 Getting Started
Playing discs | English | |
You can choose to play CDs individually or automatically one after the other by setting | ||
| ||
the Play Mode to single or all. Several hours of continuous music is possible by loading |
| |
three discs into the changer and setting the play mode to all. |
|
1Load a disc into each disc tray.
Use the top panel 0buttons to open/close each of the three disc trays. When loading a disc, make sure that it's seated properly in the disc guide.
2Press PLAY MODE (remote only) to set the Play Mode.
Switch between ALL (all the discs loaded play back to back) and SINGLE (play stops after the end of any one disc). The display shows the current mode.
3Press CD1/2/3 (remote) or CD SELECT 1/2/3 (top panel) to start playback.
In SINGLE mode, playback stops after the disc you selected has played out. In ALL mode, playback starts with the disc you select, followed by the other discs loaded.
•Turn to page 19 to learn about other CD features such as playing random tracks and programming a playlist of tracks.
Changing the disc information display
When a disc is playing, you can change the display mode to show various kinds of disc information.
1While a disc is playing, press DISPLAY/CLOCK change the display.
Press repeatedly to change between the four displays:
•Track number / Track time elapsed
•Track number / Track time remaining
•Disc number / Disc time elapsed
•Disc number / Disc time remaining
17
En
