Getting Started
Exchanging discs
You can change any of the discs not in the play position using the EXCHANGE button. Because the disc in the play position is unaffected, you can use this button to change discs even during playback.
1Press EXCHANGE to open the disc tray without interrupting playback.
2 Load a disc.
You can load two discs at a time in the two fully accessible disc spaces. Do not try and load discs into any of the other spaces; they may not load correctly and cause the unit to malfunction.
3If you want to load more discs, press DISC SKIP to rotate the disc tray.
4Press 0OPEN/CLOSE or EXCHANGE to close the disc tray.
• Do not push the disc tray shut by hand after exchanging discs.
5
Listening to the radio
The following steps show you how to tune in to FM and AM radio broadcasts using the automatic (search) and manual (step) tuning functions. Once you are tuned to a station you can memorize the frequency for recall
TUNER TV
/BAND /AUX
SYSTEM SETUP
2 ENTER 3
1 ¡
1 2 3
MONO
4 5 6 >10
7 8 9 10/0
SHIFT
1Press TUNER/BAND to select the tuner.
On the remote, press repeatedly to switch between FM and AM bands. On the front panel, the TUNER/BAND button switches between FM, AM and preset station mode. For now, choose either FM or AM.
2Tune to a station.
There are three ways to do this:
• Automatic tuning
To search for stations in the currently selected band, press and hold either the 1or ¡button for about a second. The system will start searching for the next station, stopping when it has found one. Repeat this step to search for other stations. Every time searching stops
on a station, the 
(tuned) indicator lights in the display.
21
En
