Pioneer XV-HTD510 Setting Up, Setting up for surround sound, Switching on and setting the clock

4 Setting Up

Switching on and setting the clock

This system has a built-in clock, which needs to be set to be able to use the timer features.

STANDBY

/ON

SYSTEM SETUP

5

2 ENTER 3

∞

SYSTEM DISP

1Press to switch on.

2 Press SYSTEM SETUP.

3Press the 2 or 3 button until you see

TIMER in the display.

4 Press ENTER.

5Press 2 or 3 until you see CLOCK ADJ in the display.

6Press ENTER.

The display shows a clock, with the hour blinking.

7Use the 5 and ∞ buttons to set the hour, then press ENTER.

8Use the 5 and ∞ buttons to set the minute, then press ENTER.

The display blinks to indicate that the time has been set.

• Press SYSTEM DISP anytime to see the clock when the system is on or in standby.

Setting up for surround sound

You can use this system right out of the box for surround sound with just the default settings. However, for really great surround sound, we recommend that you spend a few minutes making some settings that match this system to your listening room. Unless you change the layout of your speakers or main listening position, you only need to make most of these settings once.

TEST TONE	SURROUND
/CH LEVEL	MODE

– VOLUME +

SYSTEM SETUP

5

2 ENTER 3

∞

SHIFT

Setting the speaker distances

1 Press SYSTEM SETUP.

2Press the 2 or 3 button until you see

FRT. SP in the display.

3Use the 5 and ∞ buttons to set the distance from your main listening posi- tion to the front speakers.

Ideally, your listening position should be equidistant from the two front speakers.

The default setting is 3m. You can adjust the range from 0.3m to 9.0m in steps of 0.3m.

16

En