5 Getting Started
•Manual tuning
To change the frequency one step at a time, press the
1/ ¡buttons. When you locate a station signal,
the | (tuned) indicator lights in the display. |
•High-speed tuning
Press and hold the 1or ¡button for high speed tuning, releasing the button once you reach the frequency you want. When you stop on a station signal,
the | (tuned) indicator lights in the display. |
Improving FM stereo sound
If you’re listening to a stereo FM broadcast, but find that there is a lot of noise because of a weak signal, try switching to mono.
•Press MONO (SHIFT & 5) to switch between mono and stereo.
When listening in mono, the | indicator lights in the |
display.
Saving station presets
If you often listen to a particular radio station, it's convenient to have the receiver store the frequency for easy recall whenever you want to listen to that station. This saves the effort of manually tuning in each time. This system can save up to 30 station presets. When saving FM frequencies, the receiver also saves the mono setting (see Improving FM stereo sound above).
1Tune to a station you want to memorize.
See Listening to the radio on page 21 for more on how to do this.
2 Press SYSTEM SETUP.
3Press 2 or 3until you see ST. MEMORY appear in the display.
4 Press ENTER.
22
5Press 2 or 3to select a station preset number.
Alternatively, use the number buttons (use the >10 button for numbers over 10).
If you use the number buttons, you can skip step 6.
6Press ENTER again to save the station preset.
Repeat these steps to save up to 30 station presets.
Listening to station presets
Having saved up to 30 station presets, you can be listening to a station with a couple of button presses.
1Press TUNER/BAND to switch to the tuner.
If you’re using the front panel controls, press TUNER/ BAND repeatedly to select the preset station mode.
2Use 4 or ¢ to select the station preset you want to listen to.
Alternatively, use the number buttons (use the >10 button for numbers over 10).
• If the system is left disconnected from the AC power outlet for a lengthy period, the station presets will be lost and will have to be reprogrammed.
Listening to other components
You may have connected your TV, VCR, or other components to play through this system. Use the TV/ AUX button to select your external equipment as the source.
1Press TV/AUX.
Press repeatedly to switch between:
•TV inputs
•DIGITAL input
•AUX analog inputs
2 Start playing the source component.
En
