Pitco Frialator L20-281 manual Preparing the filter for use

Models: L20-281

1 20
Download 20 pages 17.82 Kb
Page 9
Image 9

WARNING

The power supply must be disconnected before servicing or cleaning the appliance.

Preparing the filter for use:

·Slide drawer forward until it stops.

·Grasp the Left and Right handles of the Paper Retaining Frame and lift upward to remove it.

·Remove the filter paper or pad by folding the edges inward so that the debris is collected.

·Lift the Paper Support Screen out of the pan.

·The Pan, Paper Support Screen and Paper Retaining Frame can now be cleaned.

NOTE: Be sure that the filter pan is free of any debris which could cause the paper and hold down ring not to seat properly.

·Place the Paper Support Screen in the bottom of the pan.

·Place filter Paper or Pad over screen making sure that there is an equal amount of excess paper on each side.

·Place the Retaining Frame on the paper or pad making sure that all edges are being pressed down evenly.

·Slide filter drawer back under fryer making sure that the oil return pipe locates into its mating connection.

CAUTION:

Be careful when using the clean out rod. Damage to the drain valve may result.

WARNING:

Hot shortening can cause severe injury. Take care when filtering or disposing of hot shortening.

Protective gear such as gloves, apron, face shield and sleeves should be worn.

ENGLISH

L20-281rev0(4/30/05)

7

Page 9
Image 9
Pitco Frialator L20-281 manual Preparing the filter for use