1.2 CHECKING YOUR NEW FRYER
Your new fryer and it's filter have been carefully packed into one crate. Every effort bas been made
to ensure that your fryer will be delivered to you in perfect condition. As you unpack your new fryer,
inspect each of the pieces for damage. If something is damaged, DO NOT sign the bill of lading.
Contact the shipper immediately, the shipper is only responsible for 15 days after delivery. Check
the packing list enclosed with your fryer to ensure that you have received all of the parts to the fryer.
If you are missing any parts, contact the dealer from whom the fryer was purchased. As you unpack
the fryer and it's accessories be careful to keep the weight of the fryer evenly distnbuted.
To prevent equipment damage, don't tilt the fryer onto
any two of it's casters or pull the unit by the flue vents.
Locate your Pitco Frialator warranty and fill in the serial number of the fryer and the date received.
Y 00 will fmd the serial number on the plate inside the door. Put your warranty card in a safe place
for future referen~. DO NOT return the card to Pitco Frialator.
1.2.1 Check Your.
The crate containing the fryer unit will also contain the items listed below
important and MUST be retained for future use. A complete description
contained in the Shortening Filter Procedure in Chapter 2.
(2)
(2)
(1)
~)
(1)
(1)
Fry baskets per fryer
Pitco Oeaner Sample
Filter Crumb Catch
Filter Paper
Fryer Crumb Scoop
Heat Deflector
1.3 ASSEMBLY AND LEVEUNGWhen you receive your fryer it is completely assembled with the possible ex~ptioD of the heat
deflector.
You will find a removable label at the rear top edge of the unit. This label has instructions for
positioning and installation of the heat deflector. Refer to the label and the instructions below to
install the deflector.
CAunON
These items are very
of each oomponent is
Fry Basket Hanger per fryer
Drain Oean Out Rod
Precoat Filter Aid
Oeaning Brush (Fryer)
Filter Crumb Sa>op
(1)
(1)
(1)
(1)
(1)
1-2