Pitney Bowes N521P Exit, Exit, Exit, Exit, Save, Setup, Cancel, , M G R, Configure Scale, Supervisor Setup, Supervisor Options, At the Enter Password prompt:

CHAPTER 2: USING YOUR SCALE

Supervisor Options

Note: Pressing Exit while in a supervisor option returns you to the previous screen.

Certain options are password-protected for supervisory control. You can access these options by pressing the Setup key and selecting Supervisor Setup.

At the Enter Password prompt:

1.Enter the supervisor password, M G R, on the colour-coded and alphanumeric keys from left to right as shown.

2.Press Enter. The menu options are Exit and Configure Scale. See

Green	Green			Red
→	→	→	→	→

the chart below for definitions of Configure Scale. Pressing Exit returns you to the User Setup screen.

3. Select the desired options and respond to the prompts.

Default	Option	Description
Off	Other Language	Not used in the UK at this time.

Off	Inscriptions	Not used in the UK at this time.

Off	Accounting	Not used in the UK at this time.

Off	Vibration Filter	Turn on this option only in areas of
		excessive vibration to aid the
		display of stable weight.

4.When finished, select Exit twice to exit the supervisor and user setup menus.

5.Select Save or Cancel to save or cancel your changes.

6.After exiting Setup Mode, the scale reinitializes and returns to ready mode.